On Fri, May 11, 2018 at 01:38:21PM +0300, Radu Pirea wrote:
> +config SPI_AT91_USART
> + tristate "Atmel USART Controller as SPI"
> + depends on HAS_DMA
> + depends on (ARCH_AT91 || COMPILE_TEST)
> + select MFD_AT91_USART
> + help
> + This selects a driver for the AT91 USART Controller as SPI Master,
> + present on AT91 and SAMA5 SoC series.
> +
This looks like there's some tab/space mixing going on here.
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for AT91 USART Controllers as SPI
> + *
> + * Copyright (C) 2018 Microchip Technology Inc.
Make the entire block a C++ comment so it looks more intentional rather
tha mixing C and C++.
> +static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
> +{
> + unsigned int len = aus->current_transfer->len;
> + unsigned int remaining = aus->current_tx_remaining_bytes;
> + const u8 *tx_buf = aus->current_transfer->tx_buf;
> +
> + if (tx_buf && remaining) {
> + if (at91_usart_spi_tx_ready(aus))
> + spi_writel(aus, THR, tx_buf[len - remaining]);
> + aus->current_tx_remaining_bytes--;
Missing braces here - we only write to the FIFO if there's space but we
unconditionally decrement the counter.
> + } else {
> + if (at91_usart_spi_tx_ready(aus))
> + spi_writel(aus, THR, US_DUMMY_TX);
> + }
> +}
This looks like you're open coding SPI_CONTROLLER_MUST_TX
> + int len = aus->current_transfer->len;
> + int remaining = aus->current_rx_remaining_bytes;
> + u8 *rx_buf = aus->current_transfer->rx_buf;
> +
> + if (aus->current_rx_remaining_bytes) {
> + rx_buf[len - remaining] = spi_readb(aus, RHR);
> + aus->current_rx_remaining_bytes--;
> + } else {
> + spi_readb(aus, RHR);
> + }
Similarly for _MUST_RX.
> + controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
You're actually setting both flags... this means that the handling for
cases with missing TX or RX buffers can't happen.
Attachment:
signature.asc
Description: PGP signature
