Hello Johan,
thanks for your feedback.
On Mon, May 07, 2018 at 10:02:52AM +0200, Johan Hovold wrote:
> On Thu, May 03, 2018 at 10:19:52PM +0200, Uwe Kleine-König wrote:
> > The rx trigger fires when data is pushed to the ldisc. This is a bit later
> > than the actual receiving of data but has the nice benefit that it
> > doesn't need adaption for each driver and isn't in the hot path.
> >
> > Similarily the tx trigger fires when data taken from the ldisc.
>
> You meant copied from user space, or written to the ldisc, here.
ack.
> Note that the rx-path is shared with serdev, but the write path is not.
> So with this series, serdev devices would only trigger the rx-led.
Where would be the right place to put the tx trigger to catch serdev,
too?
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> > ---
> > Changes since v1, sent with Message-Id:
> > 20180503100448.1350-1-u.kleine-koenig@xxxxxxxxxxxxxx:
> >
> > - implement tx trigger;
> > - introduce Kconfig symbol for conditional compilation;
> > - set trigger to NULL if allocating the name failed to not free random
> > pointers in case the port struct wasn't zeroed;
> > - use if/else instead of goto
>
> > @@ -499,6 +500,7 @@ static void flush_to_ldisc(struct work_struct *work)
> > struct tty_buffer *head = buf->head;
> > struct tty_buffer *next;
> > int count;
> > + unsigned long delay = 50 /* ms */;
>
> Comment after the semicolon?
Given that this comment is about the 50 and not the delay member, I
prefer it before the ;.
> >
> > /* Ldisc or user is trying to gain exclusive access */
> > if (atomic_read(&buf->priority))
>
> > diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
> > index 25d736880013..f042879a597c 100644
> > --- a/drivers/tty/tty_port.c
> > +++ b/drivers/tty/tty_port.c
> > @@ -16,6 +16,7 @@
> > #include <linux/wait.h>
> > #include <linux/bitops.h>
> > #include <linux/delay.h>
> > +#include <linux/leds.h>
> > #include <linux/module.h>
> > #include <linux/serdev.h>
> >
> > @@ -157,6 +158,30 @@ struct device *tty_port_register_device_attr_serdev(struct tty_port *port,
> >
> > tty_port_link_device(port, driver, index);
> >
> > +#ifdef CONFIG_TTY_LEDS_TRIGGER
> > + port->led_trigger_rx_name = kasprintf(GFP_KERNEL, "%s%d-rx",
> > + driver->name, index);
> > + if (port->led_trigger_rx_name) {
> > + led_trigger_register_simple(port->led_trigger_rx_name,
> > + &port->led_trigger_rx);
> > + } else {
> > + port->led_trigger_rx = NULL;
> > + pr_err("Failed to allocate trigger name for %s%d\n",
> > + driver->name, index);
> > + }
> > +
> > + port->led_trigger_tx_name = kasprintf(GFP_KERNEL, "%s%d-tx",
> > + driver->name, index);
> > + if (port->led_trigger_tx_name) {
> > + led_trigger_register_simple(port->led_trigger_tx_name,
> > + &port->led_trigger_tx);
> > + } else {
> > + port->led_trigger_tx = NULL;
> > + pr_err("Failed to allocate trigger name for %s%d\n",
> > + driver->name, index);
> > + }
> > +#endif
>
> Besides the ugly ifdefs here, you're leaking the above LED resources in
> the error paths below (e.g. on probe deferrals).
ack, the ifdevs are ugly. I'm working on an idea to get rid of them.
Will think about how to plug the leak.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
