Perform static initialization of console_port instead of initializing
during module_init.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
---
drivers/tty/serial/qcom_geni_serial.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 21e9160..67fd285c 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -105,7 +105,7 @@ struct qcom_geni_serial_port {
bool brk;
};
-static const struct uart_ops qcom_geni_serial_pops;
+static const struct uart_ops qcom_geni_console_pops;
static struct uart_driver qcom_geni_console_driver;
static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
@@ -118,7 +118,14 @@ struct qcom_geni_serial_port {
#define to_dev_port(ptr, member) \
container_of(ptr, struct qcom_geni_serial_port, member)
-static struct qcom_geni_serial_port qcom_geni_console_port;
+static struct qcom_geni_serial_port qcom_geni_console_port = {
+ .uport = {
+ .iotype = UPIO_MEM,
+ .ops = &qcom_geni_console_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+};
static int qcom_geni_serial_request_port(struct uart_port *uport)
{
@@ -1133,11 +1140,6 @@ static int __init qcom_geni_serial_init(void)
{
int ret;
- qcom_geni_console_port.uport.iotype = UPIO_MEM;
- qcom_geni_console_port.uport.ops = &qcom_geni_console_pops;
- qcom_geni_console_port.uport.flags = UPF_BOOT_AUTOCONF;
- qcom_geni_console_port.uport.line = 0;
-
ret = console_register(&qcom_geni_console_driver);
if (ret)
return ret;
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
