When the UART is used in DMA mode, .stop_rx() does nothing if the port
isn't suspended. This is wrong as .stop_rx() should stop receiving
characters unconditionally. When the port is about to be closed the DMA
channel is stopped in .shutdown(), so this isn't necessary to be in
.stop_rx() here, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/imx.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 9b92c49fc174..0ea98827ecbe 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -442,15 +442,6 @@ static void imx_stop_rx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
u32 ucr1, ucr2;
- if (sport->dma_is_rxing) {
- if (sport->port.suspended) {
- dmaengine_terminate_all(sport->dma_chan_rx);
- sport->dma_is_rxing = 0;
- } else {
- return;
- }
- }
-
ucr2 = imx_uart_readl(sport, UCR2);
imx_uart_writel(sport, ucr2 & ~UCR2_RXEN, UCR2);
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
