The aging timer fires if there are characters in the RX fifo but the
water level isn't reached yet. Make sure that the waterlevel is
configured before the aging timer is enabled to trigger a DMA request
(UCR1_ATDMAEN).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/imx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 23d591897e82..9b92c49fc174 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1239,13 +1239,13 @@ static void imx_enable_dma(struct imx_port *sport)
{
u32 ucr1;
+ imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
+
/* set UCR1 */
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 |= UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN;
imx_uart_writel(sport, ucr1, UCR1);
- imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
-
sport->dma_is_enabled = 1;
}
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
