Re: [RFC v2 2/9] dt-bindings: net: bluetooth: add support for Realtek Bluetooth chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marcel,

On Tue, Jan 2, 2018 at 12:16 PM, Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
> Hi Martin,
>
>> This adds the documentation for Bluetooth functionality of the Realtek
>> RTL8723BS and RTL8723DS.
>> Both are SDIO wifi chips with an additional Bluetooth module which is
>> connected via UART to the host.
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/net/realtek-bluetooth.txt  | 41 ++++++++++++++++++++++
>> 1 file changed, 41 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/realtek-bluetooth.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.txt b/Documentation/devicetree/bindings/net/realtek-bluetooth.txt
>> new file mode 100644
>> index 000000000000..1491329c4cd1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.txt
>> @@ -0,0 +1,41 @@
>> +Realtek Bluetooth Chips
>> +-----------------------
>> +
>> +This documents the binding structure and common properties for serial
>> +attached Realtek devices.
>> +
>> +Serial attached Realtek devices shall be a child node of the host UART
>> +device the slave device is attached to. See ../serial/slave-device.txt
>> +for more information
>> +
>> +Required properties:
>> +- compatible: should contain one of the following:
>> +    * "realtek,rtl8723bs-bluetooth"
>> +    * "realtek,rtl8723ds-bluetooth"
>> +
>> +Optional properties:
>> +- realtek,config-data: Bluetooth chipset configuration data which is
>> +                     needed for communication (it typically contains
>> +                     board specific settings like the baudrate and
>> +                     whether flow-control is used).
>> +                     This is an array of u8 values.
>
> any chance we can at least include the basic format of these config blobs. And I prefer at least an ACK from Rob here.
with including the basic format you mean a description that the config
blob should start with 0x55 0xab 0x23 0x87 (which translates to:
0x8723ab55)?

I think all non-trivial dt-binding patches should be ACKed by the DT
maintainers, so waiting for Rob's ACK is perfectly fine for me

>> +- enable-gpios: GPIO specifier, used to enable/disable the BT module
>> +- reset-gpios: GPIO specifier, used to reset the BT module
>> +
>> +
>> +Example:
>> +
>> +&uart {
>> +     ...
>> +
>> +     bluetooth {
>> +             compatible = "realtek,rtl8723bs-bluetooth";
>> +             enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
>> +             reset-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
>> +             realtek,config-data = /bits/ 8 <
>> +                     0x55 0xab 0x23 0x87 0x29 0x00 0xf4 0x00 0x01 0x01 0xf6 0x00
>> +                     0x02 0x81 0x00 0xfa 0x00 0x02 0x12 0x80 0x0c 0x00 0x10 0x02
>> +                     0x80 0x92 0x04 0x50 0xc5 0xea 0x19 0xe1 0x1b 0xfd 0xaf 0x5f
>> +                     0x01 0xa4 0x0b 0xd9 0x00 0x01 0x0f 0xe4 0x00 0x01 0x08>;
>> +     };
>> +};


Regards
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux