In the code there are two separate sections which each describe some of the bits in the AML_UART_CONTROL register. Merge these into one section to make the code easier to read. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- drivers/tty/serial/meson_uart.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 78b5d2d15a97..72d425579a4d 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -34,8 +34,15 @@ /* AML_UART_CONTROL bits */ #define AML_UART_TX_EN BIT(12) #define AML_UART_RX_EN BIT(13) +#define AML_UART_TWO_WIRE_EN BIT(15) +#define AML_UART_STOP_BIN_LEN_MASK (0x03 << 16) +#define AML_UART_STOP_BIN_1SB (0x00 << 16) +#define AML_UART_STOP_BIN_2SB (0x01 << 16) +#define AML_UART_PARITY_TYPE BIT(18) +#define AML_UART_PARITY_EN BIT(19) #define AML_UART_TX_RST BIT(22) #define AML_UART_RX_RST BIT(23) +#define AML_UART_CLEAR_ERR BIT(24) #define AML_UART_RX_INT_EN BIT(27) #define AML_UART_TX_INT_EN BIT(28) #define AML_UART_DATA_LEN_MASK (0x03 << 20) @@ -56,15 +63,6 @@ AML_UART_FRAME_ERR | \ AML_UART_TX_FIFO_WERR) -/* AML_UART_CONTROL bits */ -#define AML_UART_TWO_WIRE_EN BIT(15) -#define AML_UART_PARITY_TYPE BIT(18) -#define AML_UART_PARITY_EN BIT(19) -#define AML_UART_CLEAR_ERR BIT(24) -#define AML_UART_STOP_BIN_LEN_MASK (0x03 << 16) -#define AML_UART_STOP_BIN_1SB (0x00 << 16) -#define AML_UART_STOP_BIN_2SB (0x01 << 16) - /* AML_UART_MISC bits */ #define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8) #define AML_UART_RECV_IRQ(c) ((c) & 0xff) -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
