Commit ef838a81dd4d ("serial: Add common rs485 device tree parsing
function") consolidated retrieval of rs485 OF properties in a common
helper function but did not #ifdef it to CONFIG_OF. The function is
therefore included on ACPI platforms as well even though it's not used.
On the other hand ACPI platforms with rs485 do exist (e.g. Siemens
IOT2040) and they may leverage _DSD to store rs485 properties. Likewise,
UART platform devices instantiated from an MFD should be able to specify
rs485 properties. In fact, the tty subsystem maintainer had requested
a "generic" function during review of commit ef838a81dd4d:
https://marc.info/?l=linux-serial&m=150143441725194&w=4
Thus, instead of constraining the helper to OF platforms, make it
platform-agnostic by converting it to device_property_*() functions
and renaming it accordingly.
In imx.c, move the invocation of uart_get_rs485_mode() from
serial_imx_probe_dt() to serial_imx_probe() so that it also gets called
for non-OF devices.
In omap-serial.c, move its invocation further up within
serial_omap_probe_rs485() so that the RTS polarity can be overridden
with the driver-specific "rs485-rts-active-high" property once we
introduce a generic "rs485-rts-active-low" property.
Cc: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
---
drivers/tty/serial/atmel_serial.c | 2 +-
drivers/tty/serial/fsl_lpuart.c | 2 +-
drivers/tty/serial/imx.c | 4 ++--
drivers/tty/serial/omap-serial.c | 4 ++--
drivers/tty/serial/serial_core.c | 15 ++++++++-------
include/linux/serial_core.h | 3 +--
6 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 68d8685e5a50..cae1ba529e52 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2359,7 +2359,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_init_property(atmel_port, pdev);
atmel_set_ops(port);
- of_get_rs485_mode(pdev->dev.of_node, &port->rs485);
+ uart_get_rs485_mode(&pdev->dev, &port->rs485);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 73d6a7c3874e..009eb3f18a81 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2211,7 +2211,7 @@ static int lpuart_probe(struct platform_device *pdev)
if (ret)
goto failed_attach_port;
- of_get_rs485_mode(np, &sport->port.rs485);
+ uart_get_rs485_mode(&pdev->dev, &sport->port.rs485);
if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) {
dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 1b04ef5925ef..52456fb2bff9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2026,8 +2026,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
- of_get_rs485_mode(np, &sport->port.rs485);
-
return 0;
}
#else
@@ -2120,6 +2118,8 @@ static int serial_imx_probe(struct platform_device *pdev)
return ret;
}
+ uart_get_rs485_mode(&pdev->dev, &sport->port.rs485);
+
/* Disable interrupts before requesting them */
reg = readl_relaxed(sport->port.membase + UCR1);
reg &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN |
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 47ba9177a714..e6aadb6d02e5 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1615,6 +1615,8 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
if (!np)
return 0;
+ uart_get_rs485_mode(up->dev, rs485conf);
+
if (of_property_read_bool(np, "rs485-rts-active-high"))
rs485conf->flags |= SER_RS485_RTS_ON_SEND;
else
@@ -1636,8 +1638,6 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
up->rts_gpio = -EINVAL;
}
- of_get_rs485_mode(np, rs485conf);
-
return 0;
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index cdac01fe11ca..548bb80223c1 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -3026,19 +3026,20 @@ EXPORT_SYMBOL(uart_add_one_port);
EXPORT_SYMBOL(uart_remove_one_port);
/**
- * of_get_rs485_mode() - Implement parsing rs485 properties
- * @np: uart node
+ * uart_get_rs485_mode() - retrieve rs485 properties for given uart
+ * @dev: uart device
* @rs485conf: output parameter
*
* This function implements the device tree binding described in
* Documentation/devicetree/bindings/serial/rs485.txt.
*/
-void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
+void uart_get_rs485_mode(struct device *dev, struct serial_rs485 *rs485conf)
{
u32 rs485_delay[2];
int ret;
- ret = of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2);
+ ret = device_property_read_u32_array(dev, "rs485-rts-delay",
+ rs485_delay, 2);
if (!ret) {
rs485conf->delay_rts_before_send = rs485_delay[0];
rs485conf->delay_rts_after_send = rs485_delay[1];
@@ -3053,13 +3054,13 @@ void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
*/
rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED);
- if (of_property_read_bool(np, "rs485-rx-during-tx"))
+ if (device_property_read_bool(dev, "rs485-rx-during-tx"))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
- if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time"))
+ if (device_property_read_bool(dev, "linux,rs485-enabled-at-boot-time"))
rs485conf->flags |= SER_RS485_ENABLED;
}
-EXPORT_SYMBOL_GPL(of_get_rs485_mode);
+EXPORT_SYMBOL_GPL(uart_get_rs485_mode);
MODULE_DESCRIPTION("Serial driver core");
MODULE_LICENSE("GPL");
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 37b044e78333..ed400d3a0ae1 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -504,6 +504,5 @@ static inline int uart_handle_break(struct uart_port *port)
/*
* Common device tree parsing helpers
*/
-void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf);
-
+void uart_get_rs485_mode(struct device *dev, struct serial_rs485 *rs485conf);
#endif /* LINUX_SERIAL_CORE_H */
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
