Devices like DCF77 receivers need the baud-rate to be as low as 50.
I have tested this on a Meson GXL device with uart_A.
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxxx>
Cc: Carlo Caione <carlo@xxxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: V10lator <v10lator@xxxxxxxx>
---
drivers/tty/serial/meson_uart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/meson_uart.c
b/drivers/tty/serial/meson_uart.c
index 42e4a4c7597f..d0b63d8efe76 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -362,7 +362,7 @@ static void meson_uart_set_termios(struct uart_port
*port,
writel(val, port->membase + AML_UART_CONTROL);
- baud = uart_get_baud_rate(port, termios, old, 9600, 4000000);
+ baud = uart_get_baud_rate(port, termios, old, 50, 4000000);
meson_uart_change_speed(port, baud);
port->read_status_mask = AML_UART_TX_FIFO_WERR;
--
2.13.6
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
