The SuperIO will be configured at boot time by BIOS, but some BIOS will not deactivate the SuperIO when the end of configuration. It'll lead to mismatch for pdata->base_port in probe_setup_port(). So we'll deactivate all SuperIO before activate special base_port in fintek_8250_enter_key(). Tested on iBASE MI802. Cc: stable@xxxxxxxxxxxxxxx Tested-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx> --- drivers/tty/serial/8250/8250_fintek.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 96cc45f25ee9..b34623914413 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -128,6 +128,9 @@ static int fintek_8250_enter_key(u16 base_port, u8 key) if (!request_muxed_region(base_port, 2, "8250_fintek")) return -EBUSY; + /* Force to deactive all SuperIO in this base_port */ + outb(EXIT_KEY, base_port + ADDR_PORT); + outb(key, base_port + ADDR_PORT); outb(key, base_port + ADDR_PORT); return 0; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html