Hello, On Fri, 06 Oct 2017 15:01:18 +0200, Gregory CLEMENT wrote: > /* > * To enable the second UART on J17 (pins 24,26) refer to the uart1 > * node from armada-3720-db.dts. > * Note that TX and RX signal are the ones coming directly from the SoC: > * 1.8V TTL. > */ One issue with this comment (and Miquèl's version as well) is that it does not explain why you don't enable this UART by default. The real reason is in the commit log from Miquèl, and should probably be part of the comment. Perhaps something like: /* * Connector J17 (pins X, Y, Z) exposes a number of different * features: * - UART1 (pins 24 = RX, pins 26 = TX), see armada-3720-db.dts for an * example on how to enable UART1. Beware that the signals are 1.8V * TTL. * - SPIxyz * - I2Cxyz */ Otherwise, it's not clear at all why you don't just enable UART1. Or perhaps I misunderstood Miquèl's commit log ? Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
