Intel Cedar Fork PCH has similar HSU as has been used on Intel Denverton.
Add PCI ID to get it enumerated.
While here, remove DNV part form INTEL_MID_UART_DNV_FISR to show that is
used not only on Intel Denverton from now on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_mid.c | 6 ++++--
drivers/tty/serial/8250/8250_pci.c | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index ec957cce8c9a..b8f0b7f70d5a 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -23,10 +23,11 @@
#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c
#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d
#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191
+#define PCI_DEVICE_ID_INTEL_CDF_UART 0x18d8
#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8
/* Intel MID Specific registers */
-#define INTEL_MID_UART_DNV_FISR 0x08
+#define INTEL_MID_UART_FISR 0x08
#define INTEL_MID_UART_PS 0x30
#define INTEL_MID_UART_MUL 0x34
#define INTEL_MID_UART_DIV 0x38
@@ -130,7 +131,7 @@ static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
struct uart_8250_port *up = up_to_u8250p(p);
- unsigned int fisr = serial_port_in(p, INTEL_MID_UART_DNV_FISR);
+ unsigned int fisr = serial_port_in(p, INTEL_MID_UART_FISR);
u32 status;
int ret = 0;
int err;
@@ -377,6 +378,7 @@ static const struct pci_device_id pci_ids[] = {
MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board),
MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board),
MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_CDF_UART, dnv_board),
MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board),
{ },
};
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0c101a7470b0..a6bf59d8b1d6 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3368,6 +3368,7 @@ static const struct pci_device_id blacklist[] = {
{ PCI_VDEVICE(INTEL, 0x081c), },
{ PCI_VDEVICE(INTEL, 0x081d), },
{ PCI_VDEVICE(INTEL, 0x1191), },
+ { PCI_VDEVICE(INTEL, 0x18d8), },
{ PCI_VDEVICE(INTEL, 0x19d8), },
/* Intel platforms with DesignWare UART */
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
