On 08/02/2017 02:34 AM, Jonas Gorski wrote:
> This patchset adds and uses clckdev lookup support to name input clocks
> in various drivers more closely to their functions, or simplify their
> usage.
>
> Since most of these patches touch arch/mips, it probably makes most
> sense to go through the MIPS tree.
>
> The HSSPI driver was already updated previously to support a "pll"
> input with ff18e1ef04e2 ("spi/bcm63xx-hsspi: allow providing clock rate
> through a second clock"), so there is no need to touch it.
>
> This patch series is part of an effort to modernize BCM63XX and clean up
> its drivers to eventually make them usable with BMIPS and device tree.
For this entire series:
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Thanks!
>
> Jonas Gorski (8):
> MIPS: BCM63XX: add clkdev lookup support
> MIPS: BCM63XX: provide periph clock as refclk for uart
> tty/bcm63xx_uart: use refclk for the expected clock name
> tty/bcm63xx_uart: allow naming clock in device tree
> MIPS: BCM63XX: provide enet clocks as "enet" to the ethernet devices
> bcm63xx_enet: just use "enet" as the clock name
> MIPS: BCM63XX: move the HSSPI PLL HZ into its own clock
> MIPS: BMIPS: name the refclk clock for uart
>
> .../bindings/serial/brcm,bcm6345-uart.txt | 6 +
> arch/mips/Kconfig | 1 +
> arch/mips/bcm63xx/clk.c | 181 ++++++++++++++++-----
> arch/mips/boot/dts/brcm/bcm3368.dtsi | 2 +
> arch/mips/boot/dts/brcm/bcm63268.dtsi | 2 +
> arch/mips/boot/dts/brcm/bcm6328.dtsi | 2 +
> arch/mips/boot/dts/brcm/bcm6358.dtsi | 2 +
> arch/mips/boot/dts/brcm/bcm6362.dtsi | 2 +
> arch/mips/boot/dts/brcm/bcm6368.dtsi | 2 +
> drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +-
> drivers/tty/serial/bcm63xx_uart.c | 6 +-
> 11 files changed, 168 insertions(+), 43 deletions(-)
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
