On Wed, Aug 2, 2017 at 3:18 PM, Oleksandr Shamray
<oleksandrs@xxxxxxxxxxxx> wrote:
> Driver adds support of Aspeed 2500/2400 series SOC JTAG master controller.
>
> Driver implements the following jtag ops:
> - freq_get;
> - freq_set;
> - status_get;
> - idle;
> - xfer;
>
> It has been tested on Mellanox system with BMC equipped with
> Aspeed 2520 SoC for programming CPLD devices.
>
> Signed-off-by: Oleksandr Shamray <oleksandrs@xxxxxxxxxxxx>
> Signed-off-by: Jiri Pirko <jiri@xxxxxxxxxxxx>
Looking at this one before the subsystem. Overall looks really nice,
it seems you got a good abstraction between the subsystem and the
driver.
> +
> +static int aspeed_jtag_freq_set(struct jtag *jtag, unsigned long freq);
> +static int aspeed_jtag_freq_get(struct jtag *jtag, unsigned long *frq);
> +static int aspeed_jtag_status_get(struct jtag *jtag,
> + enum jtag_endstate *status);
> +static int aspeed_jtag_idle(struct jtag *jtag,
> + struct jtag_run_test_idle *runtest);
> +static int aspeed_jtag_xfer(struct jtag *jtag, struct jtag_xfer *xfer);
Please try to reorder the functions definitions in a way that lets you
remove the forward declarations.
> +
> +static void aspeed_jtag_run_test_idle_sw(struct aspeed_jtag *aspeed_jtag,
> + struct jtag_run_test_idle *runtest)
> +{
> + char sm_pause_irpause[] = {1, 1, 1, 1, 0, 1, 0};
> + char sm_pause_drpause[] = {1, 1, 1, 0, 1, 0};
> + char sm_idle_irpause[] = {1, 1, 0, 1, 0};
> + char sm_idle_drpause[] = {1, 0, 1, 0};
> + char sm_pause_idle[] = {1, 1, 0};
These could be 'static const' if you adapt the aspeed_jtag_sm_cycle
prototype accordingly.
> +
> +static const struct of_device_id aspeed_jtag_of_match[] = {
> + { .compatible = "aspeed,aspeed-jtag", },
> + {}
> +};
The series should include a patch for the DT binding for this device.
You may want to be a little more specific here, to avoid problems if
aspeed ever makes an updated version of this device with a slightly
different register interface. Usually we include the full name of the
SoC in the "compatible" string for that.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
