* yegorslists@xxxxxxxxxxxxxx <yegorslists@xxxxxxxxxxxxxx> [170727 06:18]: > From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > > This patch series aims to reintroduce the mctrl_gpio helpers for 8250 > UARTs. > > There are some UARTs that use GPIO signals as a wakeup-sourse. > The first patch addresses this issue and tries to destinguish GPIO usage > via searching for "wakeup-sourse" property. Though it must be decided whether > this property is secure to use for this purpose. The wakeup-source part you should be able to handle pretty much out of box with Linux generic wakeirqs if configured. See for example drivers/i2c/i2c-core.c for the dev_pm_set_dedicated_wake_irq() part. As long as the 8250 driver has runtime PM implemented it will wake up the 8250 device. This should work just fine also with am335x gpios, just configure the secondary wakeup gpio interrupt using interrupts-extended in device tree. Typically the interrupts are named "irq" and "wakeup". And if the pin is used as gpio, you can just dev_pm_clear_wake_irq() during runtime. If having issues, we're still missing the wakeirq level configuration, the patch below should do the trick there. Regards, Tony 8< ----------- diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c --- a/drivers/base/power/wakeirq.c +++ b/drivers/base/power/wakeirq.c @@ -198,7 +198,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) * so we use a threaded irq. */ err = request_threaded_irq(irq, NULL, handle_threaded_wake_irq, - IRQF_ONESHOT, dev_name(dev), wirq); + irq_get_trigger_type(irq) | IRQF_ONESHOT, + dev_name(dev), wirq); if (err) goto err_free; -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
