1. Do not set the RX trigger level for software timeout devices on reset;
there is no timeout by default, and data will rot.
2. Do set the RX trigger level for hardware timeout devices when set
via sysfs attribute.
Fixes SCIFA-type serial consoles.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/tty/serial/sh-sci.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index f95a56c..9a47cc4 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1076,8 +1076,11 @@ static ssize_t rx_trigger_store(struct device *dev,
if (kstrtol(buf, 0, &r) == -EINVAL)
return -EINVAL;
+
sci->rx_trigger = scif_set_rtrg(port, r);
- scif_set_rtrg(port, 1);
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ scif_set_rtrg(port, 1);
+
return count;
}
@@ -2179,7 +2182,11 @@ static void sci_reset(struct uart_port *port)
setup_timer(&s->rx_fifo_timer, rx_fifo_timer_fn,
(unsigned long)s);
} else {
- scif_set_rtrg(port, s->rx_trigger);
+ if (port->type == PORT_SCIFA ||
+ port->type == PORT_SCIFB)
+ scif_set_rtrg(port, 1);
+ else
+ scif_set_rtrg(port, s->rx_trigger);
}
}
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
