On Thu, Feb 2, 2017 at 1:40 PM, Tim Harvey <tharvey@xxxxxxxxxxxxx> wrote:
> Fabio,
>
> Works great for me with respect to TXEN polarity thanks!
Ok, great!
> Something I noticed this time around while testing however is that in
> some cases I'm not getting the dma_tx_callback telling us the tx dma
> completed causing the stop_tx to return and the TXEN to not be
> de-asserted. I hadn't noticed this before. Have you encountered it in
> your use/testing?
How did you trigger this issue exactly?
Could you try with the change below?
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 91991d6..115d706 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -377,7 +377,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a208e7e..ccb1447 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -373,7 +373,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 968fda9..2761af7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -421,7 +421,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
