Ensure that the uart clock is enabled prior to writing to the
interrupt mask register in s3c24xx_serial_resume_noirq function.
Without enabing the uart clock, the uart register cannot be accessed.
Signed-off-by: Youngmin Nam <youngmin.nam@xxxxxxxxxxx>
---
drivers/tty/serial/samsung.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index f44615f..06488fd 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1921,6 +1921,7 @@ static int s3c24xx_serial_resume(struct device *dev)
static int s3c24xx_serial_resume_noirq(struct device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
if (port) {
/* restore IRQ mask */
@@ -1930,7 +1931,9 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
uintm &= ~S3C64XX_UINTM_TXD_MSK;
if (rx_enabled(port))
uintm &= ~S3C64XX_UINTM_RXD_MSK;
+ clk_prepare_enable(ourport->clk);
wr_regl(port, S3C64XX_UINTM, uintm);
+ clk_disable_unprepare(ourport->clk);
}
}
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
