2016-09-22 15:20 GMT+02:00 Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>:
> On Mon, Sep 12, 2016 at 11:47:32AM +0200, Richard Genoud wrote:
>> Commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when
>> hardware handshake is enabled") broke the hardware handshake when GPIOs
>> where used.
>
> s/where/were/
ok.
>> Hardware handshake with GPIOs used to work before this commit because
>> the CRTSCTS flag (termios->c_cflag) was set, but not the
>> ATMEL_US_USMODE_HWHS flag (controller register) ; so hardware handshake
>> enabled, but not handled by the controller.
>>
>> This commit restores this behaviour.
>>
>> NB: -stable is not Cced because it doesn't cleanly apply on 4.1+
>> and it will also need previous commit:
>> "serial: mctrl_gpio: implement mctrl_gpio_use_rtscts"
>>
>> Signed-off-by: Richard Genoud <richard.genoud@xxxxxxxxx>
>> Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
>> Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")
>> ---
>> drivers/tty/serial/atmel_serial.c | 11 ++++++++---
>> 1 file changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
>> index 2eaa18ddef61..e9b4fbf88c2d 100644
>> --- a/drivers/tty/serial/atmel_serial.c
>> +++ b/drivers/tty/serial/atmel_serial.c
>> @@ -2025,6 +2025,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
>> static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
>> struct ktermios *old)
>> {
>> + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
>> unsigned long flags;
>> unsigned int old_mode, mode, imr, quot, baud;
>>
>> @@ -2126,8 +2127,12 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
>> atmel_uart_writel(port, ATMEL_US_TTGR,
>> port->rs485.delay_rts_after_send);
>> mode |= ATMEL_US_USMODE_RS485;
>> - } else if (termios->c_cflag & CRTSCTS) {
>> - /* RS232 with hardware handshake (RTS/CTS) */
>> + } else if ((termios->c_cflag & CRTSCTS) &&
>> + !mctrl_gpio_use_rtscts(atmel_port->gpios)) {
>
> IMHO the behaviour of the hw controlled pins shouldn't change when
> mctrl_gpio is in use (if possible). But I don't understand the issue so
> I guess you need a better changelog.
Yes, the behavior of the CTS/RTS pins should the same whenever they
are GPIOs or not.
That was the case before commit 1cf6e8fc8341 ("tty/serial: at91: fix
RTS line management when
hardware handshake is enabled")
BUT, this commit (1cf6e8fc834) introduced the actual use of the
ATMEL_US_USMODE_HWHS flag.
This flags changes the way RTS/CTS pins are driven, and that's the
discussion we are having in patch 3/3.
>> + /*
>> + * RS232 with hardware handshake (RTS/CTS)
>> + * handled by the controller.
>> + */
>> if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) {
>> dev_info(port->dev, "not enabling hardware flow control because DMA is used");
>> termios->c_cflag &= ~CRTSCTS;
>> @@ -2135,7 +2140,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
>> mode |= ATMEL_US_USMODE_HWHS;
>> }
>> } else {
>> - /* RS232 without hadware handshake */
>> + /* RS232 without hadware handshake or controlled by GPIOs */
>
> When touching this line, please also do s/hadware/hardware/.
ok.
>
>> mode |= ATMEL_US_USMODE_NORMAL;
>> }
>
> Best regards
> Uwe
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
