[PATCH 1/4] serial: 8250: Eliminate needless local in irq handlers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



dma_err is not used other than for boolean evaluation;
substitute the actual operation directly.

Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_omap.c | 8 ++------
 drivers/tty/serial/8250/8250_port.c | 6 +-----
 2 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 6f76051..7c8c886 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1033,7 +1033,6 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 	unsigned char status;
 	unsigned long flags;
 	u8 iir;
-	int dma_err = 0;
 
 	serial8250_rpm_get(up);
 
@@ -1048,9 +1047,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 	status = serial_port_in(port, UART_LSR);
 
 	if (status & (UART_LSR_DR | UART_LSR_BI)) {
-
-		dma_err = omap_8250_rx_dma(up, iir);
-		if (dma_err) {
+		if (omap_8250_rx_dma(up, iir)) {
 			status = serial8250_rx_chars(up, status);
 			omap_8250_rx_dma(up, 0);
 		}
@@ -1066,8 +1063,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
 			 * try again due to an earlier failer which
 			 * might have been resolved by now.
 			 */
-			dma_err = omap_8250_tx_dma(up);
-			if (dma_err)
+			if (omap_8250_tx_dma(up))
 				serial8250_tx_chars(up);
 		}
 	}
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index e213da0..8ae9bb2 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1787,7 +1787,6 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	unsigned long flags;
 	struct uart_8250_port *up = up_to_u8250p(port);
-	int dma_err = 0;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
@@ -1799,10 +1798,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	DEBUG_INTR("status = %x...", status);
 
 	if (status & (UART_LSR_DR | UART_LSR_BI)) {
-		if (up->dma)
-			dma_err = up->dma->rx_dma(up, iir);
-
-		if (!up->dma || dma_err)
+		if (!up->dma || up->dma->rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
 	serial8250_modem_status(up);
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux