No functional change. The following adjustments were made to be more in
line with official coding style and to be more consistent.
Stop mixing tabs and spaces for alignment. Align continuations in
function prototypes correctly. Be more consistent with indentation of
statements broken into multiple lines. Break some long lines properly.
Stop putting labels and statements into the same line. Use braces
consistently for a single statement.
Signed-off-by: Grigori Goronzy <greg@xxxxxxxxxxxx>
---
drivers/usb/serial/ch341.c | 47 +++++++++++++++++++++++++---------------------
1 file changed, 26 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index bf0d94e..4397014 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -108,11 +108,11 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
int r;
dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n",
- USB_DIR_OUT|0x40, (int)request, (int)value, (int)index);
+ USB_DIR_OUT|0x40, (int)request, (int)value, (int)index);
r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- value, index, NULL, 0, DEFAULT_TIMEOUT);
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ value, index, NULL, 0, DEFAULT_TIMEOUT);
return r;
}
@@ -124,17 +124,17 @@ static int ch341_control_in(struct usb_device *dev,
int r;
dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n",
- USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf,
- (int)bufsize);
+ USB_DIR_IN|0x40, (int)request, (int)value, (int)index,
+ buf, (int)bufsize);
r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- value, index, buf, bufsize, DEFAULT_TIMEOUT);
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ value, index, buf, bufsize, DEFAULT_TIMEOUT);
return r;
}
static int ch341_init_set_baudrate(struct usb_device *dev,
- struct ch341_private *priv, unsigned ctrl)
+ struct ch341_private *priv, unsigned ctrl)
{
short a, b;
int r;
@@ -158,7 +158,8 @@ static int ch341_init_set_baudrate(struct usb_device *dev,
a = (factor & 0xff00) | divisor;
b = factor & 0xff;
- r = ch341_control_out(dev, CH341_SERIAL_INIT, 0x9c | (ctrl << 8) , a | 0x80);
+ r = ch341_control_out(dev, CH341_SERIAL_INIT, 0x9c | (ctrl << 8),
+ a | 0x80);
return r;
}
@@ -189,8 +190,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
spin_unlock_irqrestore(&priv->lock, flags);
- } else
+ } else {
r = -EPROTO;
+ }
out: kfree(buffer);
return r;
@@ -267,7 +269,8 @@ static int ch341_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, priv);
return 0;
-error: kfree(priv);
+error:
+ kfree(priv);
return r;
}
@@ -329,20 +332,22 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (r) {
dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
- __func__, r);
+ __func__, r);
goto out;
}
r = usb_serial_generic_open(tty, port);
-out: return r;
+out:
+ return r;
}
/* Old_termios contains the original termios settings and
* tty->termios contains the new setting to be used.
*/
static void ch341_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned baud_rate;
@@ -437,7 +442,7 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
goto out;
}
dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n",
- __func__, break_reg[0], break_reg[1]);
+ __func__, break_reg[0], break_reg[1]);
if (break_state != 0) {
dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
@@ -448,7 +453,7 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
break_reg[1] |= CH341_LCR_ENABLE_TX;
}
dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
- __func__, break_reg[0], break_reg[1]);
+ __func__, break_reg[0], break_reg[1]);
reg_contents = get_unaligned_le16(break_reg);
r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
ch341_break_reg, reg_contents);
@@ -483,7 +488,7 @@ static int ch341_tiocmset(struct tty_struct *tty,
}
static void ch341_update_line_status(struct usb_serial_port *port,
- unsigned char *data, size_t len)
+ unsigned char *data, size_t len)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
@@ -542,11 +547,11 @@ static void ch341_read_int_callback(struct urb *urb)
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",
- __func__, urb->status);
+ __func__, urb->status);
return;
default:
dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",
- __func__, urb->status);
+ __func__, urb->status);
goto exit;
}
@@ -556,7 +561,7 @@ exit:
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&urb->dev->dev, "%s - usb_submit_urb failed: %d\n",
- __func__, status);
+ __func__, status);
}
}
@@ -604,7 +609,7 @@ static struct usb_serial_driver ch341_device = {
.id_table = id_table,
.num_ports = 1,
.open = ch341_open,
- .dtr_rts = ch341_dtr_rts,
+ .dtr_rts = ch341_dtr_rts,
.carrier_raised = ch341_carrier_raised,
.close = ch341_close,
.set_termios = ch341_set_termios,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
