make sbsa uart platform driver more generic so that platform
driver code can be reused by ZTE uart platform driver.
Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 57 +++++++++++++++++++++++++++--------------
1 file changed, 38 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7c198e0..2d1917e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -73,6 +73,9 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
+static const struct uart_ops amba_pl011_pops;
+static const struct uart_ops sbsa_uart_pops;
+
static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
[REG_DR] = UART01x_DR,
[REG_FR] = UART01x_FR,
@@ -92,6 +95,7 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
const u16 *reg_offset;
+ const struct uart_ops *uart_pops;
unsigned int ifls;
bool access_32b;
bool oversampling;
@@ -119,13 +123,20 @@ static struct vendor_data vendor_arm = {
.get_fifosize = get_fifosize_arm,
};
+static unsigned int get_fifosize_sbsa(struct amba_device *dev)
+{
+ return 32;
+}
+
static struct vendor_data vendor_sbsa = {
.reg_offset = pl011_std_offsets,
+ .uart_pops = &sbsa_uart_pops,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
.always_enabled = true,
.fixed_options = true,
+ .get_fifosize = get_fifosize_sbsa,
};
static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
@@ -189,6 +200,7 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
static struct vendor_data vendor_zte __maybe_unused = {
.reg_offset = pl011_zte_offsets,
+ .uart_pops = &amba_pl011_pops,
.access_32b = true,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
.get_fifosize = get_fifosize_arm,
@@ -2086,7 +2098,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
return ret;
}
-static struct uart_ops amba_pl011_pops = {
+static const struct uart_ops amba_pl011_pops = {
.tx_empty = pl011_tx_empty,
.set_mctrl = pl011_set_mctrl,
.get_mctrl = pl011_get_mctrl,
@@ -2521,10 +2533,12 @@ static int pl011_resume(struct device *dev)
#endif
static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+static const struct of_device_id pl011_uart_plat_of_match[];
-static int sbsa_uart_probe(struct platform_device *pdev)
+static int pl011_uart_plat_probe(struct platform_device *pdev)
{
struct uart_amba_port *uap;
+ struct vendor_data *vendor;
struct resource *r;
int portnr, ret;
int baudrate;
@@ -2535,11 +2549,15 @@ static int sbsa_uart_probe(struct platform_device *pdev)
*/
if (pdev->dev.of_node) {
struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(pl011_uart_plat_of_match, &pdev->dev);
ret = of_property_read_u32(np, "current-speed", &baudrate);
if (ret)
return ret;
+ vendor = (struct vendor_data *)of_id->data;
} else {
+ vendor = &vendor_sbsa;
baudrate = 115200;
}
@@ -2552,15 +2570,15 @@ static int sbsa_uart_probe(struct platform_device *pdev)
if (!uap)
return -ENOMEM;
- uap->reg_offset = vendor_sbsa.reg_offset;
- uap->vendor = &vendor_sbsa;
- uap->fifosize = 32;
- uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
+ uap->vendor = vendor;
+ uap->reg_offset = vendor->reg_offset;
+ uap->fifosize = vendor->get_fifosize(NULL);
+ uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.irq = platform_get_irq(pdev, 0);
- uap->port.ops = &sbsa_uart_pops;
+ uap->port.ops = vendor->uart_pops;
uap->fixed_baud = baudrate;
- snprintf(uap->type, sizeof(uap->type), "SBSA");
+ snprintf(uap->type, sizeof(uap->type), "PL011 plat");
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2573,7 +2591,7 @@ static int sbsa_uart_probe(struct platform_device *pdev)
return pl011_register_port(uap);
}
-static int sbsa_uart_remove(struct platform_device *pdev)
+static int pl011_uart_plat_remove(struct platform_device *pdev)
{
struct uart_amba_port *uap = platform_get_drvdata(pdev);
@@ -2582,11 +2600,12 @@ static int sbsa_uart_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id sbsa_uart_of_match[] = {
- { .compatible = "arm,sbsa-uart", },
+static const struct of_device_id pl011_uart_plat_of_match[] = {
+ { .compatible = "arm,sbsa-uart", .data = &vendor_sbsa },
+ { .compatible = "zte,zx296702-uart", .data = &vendor_zte },
{},
};
-MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
+MODULE_DEVICE_TABLE(of, pl011_uart_plat_of_match);
static const struct acpi_device_id sbsa_uart_acpi_match[] = {
{ "ARMH0011", 0 },
@@ -2594,12 +2613,12 @@ static const struct acpi_device_id sbsa_uart_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
-static struct platform_driver arm_sbsa_uart_platform_driver = {
- .probe = sbsa_uart_probe,
- .remove = sbsa_uart_remove,
+static struct platform_driver pl011_uart_platform_driver = {
+ .probe = pl011_uart_plat_probe,
+ .remove = pl011_uart_plat_remove,
.driver = {
- .name = "sbsa-uart",
- .of_match_table = of_match_ptr(sbsa_uart_of_match),
+ .name = "uart-pl011-plat",
+ .of_match_table = of_match_ptr(pl011_uart_plat_of_match),
.acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
},
};
@@ -2634,14 +2653,14 @@ static int __init pl011_init(void)
{
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
- if (platform_driver_register(&arm_sbsa_uart_platform_driver))
+ if (platform_driver_register(&pl011_uart_platform_driver))
pr_warn("could not register SBSA UART platform driver\n");
return amba_driver_register(&pl011_driver);
}
static void __exit pl011_exit(void)
{
- platform_driver_unregister(&arm_sbsa_uart_platform_driver);
+ platform_driver_unregister(&pl011_uart_platform_driver);
amba_driver_unregister(&pl011_driver);
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
