Re: [PATCH] tty: amba-pl011: Use 32-bit accesses for SBSA UART

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/07/2016 11:43 PM, Christopher Covington wrote:
From: Christopher Covington <christopher.covington@xxxxxxxxxx>

Version 2 of the Server Base System Architecture (SBSA) describes the
Generic UART registers as 32 bits wide. At least one implementation, found
of the Qualcomm Technologies QDF2432, only supports 32 bit accesses. While
other implementations may also support smaller sized accesses, simply use
32 bit accesses all the time for the SBSA UART for simple, broad,
compatibility.

Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
---

I can boot the v4.5-rc7 on my QDF2432 platform with this patch,
and could not otherwise.

Tested-by: Mark Langsdorf <mlangsdo@xxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux