On Tue, Feb 23, 2016 at 7:30 AM, Peter Hung <hpeter@xxxxxxxxx> wrote: > This driver is GPIOLIB driver for F81504/508/512, it'll handle the > GPIOLIB operation of this device. This module will depend on > MFD_FINTEK_F81504_CORE. > > IC function list: > F81504: Max 2x8 GPIOs and max 4 serial ports > port2/3 are multi-function > F81508: Max 6x8 GPIOs and max 8 serial ports > port2/3 are multi-function, port8/9/10/11 are gpio only > F81512: Max 6x8 GPIOs and max 12 serial ports > port2/3/8/9/10/11 are multi-function > > GPIO register: > PCI Configuration space: > F0h: bit0~5: Enable GPIO0~5 > bit6~7: Reserve > F3h: bit0~5: Multi-Functional Flag (0:GPIO/1:UART) > bit0: UART2 pin out for UART2 / GPIO0 > bit1: UART3 pin out for UART3 / GPIO1 > bit2: UART8 pin out for UART8 / GPIO2 > bit3: UART9 pin out for UART9 / GPIO3 > bit4: UART10 pin out for UART10 / GPIO4 > bit5: UART11 pin out for UART11 / GPIO5 > bit6~7: Reserve > F1h: IO address (LSB) > F2h: IO address (MSB) > F8h + 8 * set: Direction control (bitwise) > bitx: 0 - Input mode > bitx: 1 - Output mode > F9h + 8 * set: Drive ability control (bitwise) > bitx: 0 - Open drain (default) > bitx: 1 - Push Pull > In this driver, we only implements open drain mode. > > IO space: > (IO base + 0~5): GPIO-0x~5x in/out value (bitwise) > > Suggested-by: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx> > Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > Signed-off-by: Peter Hung <hpeter+linux_kernel@xxxxxxxxx> I assume this must do in through the MFD or TTY tree with the rest. There is a new devm_gpiochip_add_data() coming into the GPIO tree but we can patch it to use that later. (Note to Laxman to revisit...) Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
