Re: [PATCH] tty/serial: at91: fix bad offset for UART timeout register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 22/02/2016 15:18, Ludovic Desroches a écrit :
> With SAMA5D2, the UART has hw timeout but the offset of the register to
> define this value is not the same as the one for USART.
> When using the new UART, the value of this register was 0 so we never
> get timeout irqs. It involves that when using DMA, we were stuck until
> the execution of the dma callback which happens when a buffer is full
> (so after receiving 2048 bytes).
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>

Yes, sure: it fixes my previous patch "[PATCH v2 2/2] serial: atmel: add
support for new UART version" that Greg had already included in his
tty-testing and tty-next branches. Greg, it could be interesting to
stick this fix with the patch cited above.

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

Thanks, bye.


> ---
>  drivers/tty/serial/atmel_serial.c | 19 +++++++++++++------
>  include/linux/atmel_serial.h      |  3 ++-
>  2 files changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index b30c93f..4b6f04a 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -159,6 +159,7 @@ struct atmel_uart_port {
>  	u32			rts_high;
>  	u32			rts_low;
>  	bool			ms_irq_enabled;
> +	u32			rtor;	/* address of receiver timeout register if it exists */
>  	bool			has_hw_timer;
>  	struct timer_list	uart_timer;
>  
> @@ -1718,12 +1719,16 @@ static void atmel_get_ip_name(struct uart_port *port)
>  
>  	atmel_port->has_hw_timer = false;
>  
> -	if (name == usart || name == new_uart) {
> -		dev_dbg(port->dev, "Usart or uart with hw timer\n");
> +	if (name == new_uart) {
> +		dev_dbg(port->dev, "Uart with hw timer");
>  		atmel_port->has_hw_timer = true;
> +		atmel_port->rtor = ATMEL_UA_RTOR;
> +	} else if (name == usart) {
> +		dev_dbg(port->dev, "Usart\n");
> +		atmel_port->has_hw_timer = true;
> +		atmel_port->rtor = ATMEL_US_RTOR;
>  	} else if (name == dbgu_uart) {
>  		dev_dbg(port->dev, "Dbgu or uart without hw timer\n");
> -		atmel_port->has_hw_timer = false;
>  	} else {
>  		/* fallback for older SoCs: use version field */
>  		version = atmel_uart_readl(port, ATMEL_US_VERSION);
> @@ -1732,11 +1737,11 @@ static void atmel_get_ip_name(struct uart_port *port)
>  		case 0x10213:
>  			dev_dbg(port->dev, "This version is usart\n");
>  			atmel_port->has_hw_timer = true;
> +			atmel_port->rtor = ATMEL_US_RTOR;
>  			break;
>  		case 0x203:
>  		case 0x10202:
>  			dev_dbg(port->dev, "This version is uart\n");
> -			atmel_port->has_hw_timer = false;
>  			break;
>  		default:
>  			dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
> @@ -1841,7 +1846,8 @@ static int atmel_startup(struct uart_port *port)
>  					jiffies + uart_poll_timeout(port));
>  		/* set USART timeout */
>  		} else {
> -			atmel_uart_writel(port, ATMEL_US_RTOR, PDC_RX_TIMEOUT);
> +			atmel_uart_writel(port, atmel_port->rtor,
> +					  PDC_RX_TIMEOUT);
>  			atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
>  
>  			atmel_uart_writel(port, ATMEL_US_IER,
> @@ -1856,7 +1862,8 @@ static int atmel_startup(struct uart_port *port)
>  					jiffies + uart_poll_timeout(port));
>  		/* set USART timeout */
>  		} else {
> -			atmel_uart_writel(port, ATMEL_US_RTOR, PDC_RX_TIMEOUT);
> +			atmel_uart_writel(port, atmel_port->rtor,
> +					  PDC_RX_TIMEOUT);
>  			atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
>  
>  			atmel_uart_writel(port, ATMEL_US_IER,
> diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
> index ee696d7..5a4d664 100644
> --- a/include/linux/atmel_serial.h
> +++ b/include/linux/atmel_serial.h
> @@ -119,7 +119,8 @@
>  #define ATMEL_US_BRGR		0x20	/* Baud Rate Generator Register */
>  #define	ATMEL_US_CD		GENMASK(15, 0)	/* Clock Divider */
>  
> -#define ATMEL_US_RTOR		0x24	/* Receiver Time-out Register */
> +#define ATMEL_US_RTOR		0x24	/* Receiver Time-out Register for USART */
> +#define ATMEL_UA_RTOR		0x28	/* Receiver Time-out Register for UART */
>  #define	ATMEL_US_TO		GENMASK(15, 0)	/* Time-out Value */
>  
>  #define ATMEL_US_TTGR		0x28	/* Transmitter Timeguard Register */
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux