The UPF_* flags are the correct values to use for struct uart_port
and struct old_serial_port/SERIAL_PORT_DFNS.
Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
arch/alpha/include/asm/serial.h | 8 ++++----
arch/frv/include/asm/serial.h | 2 +-
arch/m68k/include/asm/serial.h | 8 ++++----
arch/mips/pmcs-msp71xx/msp_serial.c | 2 +-
arch/mn10300/include/asm/serial.h | 10 +++++-----
arch/xtensa/platforms/xt2000/setup.c | 2 +-
drivers/tty/serial/serial_ks8695.c | 2 +-
7 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h
index 22909b8..e31557f 100644
--- a/arch/alpha/include/asm/serial.h
+++ b/arch/alpha/include/asm/serial.h
@@ -14,11 +14,11 @@
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#define SERIAL_PORT_DFNS \
diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h
index dbb8259..bce0d0d 100644
--- a/arch/frv/include/asm/serial.h
+++ b/arch/frv/include/asm/serial.h
@@ -13,6 +13,6 @@
*/
#define BASE_BAUD 0
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS UPF_BOOT_AUTOCONF
#define SERIAL_PORT_DFNS
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
index 06d0cb1..6d44970 100644
--- a/arch/m68k/include/asm/serial.h
+++ b/arch/m68k/include/asm/serial.h
@@ -18,11 +18,11 @@
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#ifdef CONFIG_ISA
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
index d304be2..8e6e8db 100644
--- a/arch/mips/pmcs-msp71xx/msp_serial.c
+++ b/arch/mips/pmcs-msp71xx/msp_serial.c
@@ -110,7 +110,7 @@ void __init msp_serial_setup(void)
up.uartclk = uartclk;
up.regshift = 2;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.type = PORT_16550A;
up.line = 0;
up.serial_out = msp_serial_out;
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index c199021..594ebff 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -14,15 +14,15 @@
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define FOURPORT_FLAGS UPF_FOURPORT
#define ACCENT_FLAGS 0
#define BOCA_FLAGS 0
#define HUB6_FLAGS 0
diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
index 8767896..5f4bd71 100644
--- a/arch/xtensa/platforms/xt2000/setup.c
+++ b/arch/xtensa/platforms/xt2000/setup.c
@@ -113,7 +113,7 @@ void platform_heartbeat(void)
}
//#define RS_TABLE_SIZE 2
-//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+//#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF|UPF_SKIP_TEST)
#define _SERIAL_PORT(_base,_irq) \
{ \
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index b4decf8..57f1523 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -554,7 +554,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
.uartclk = KS8695_CLOCK_RATE * 16,
.fifosize = 16,
.ops = &ks8695uart_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
}
};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
