Hi Geert,
Thank you for the patch.
On Thursday 19 November 2015 19:39:02 Geert Uytterhoeven wrote:
> Add the device node for the external SCIF_CLK.
> The presence of the SCIF_CLK crystal and its clock frequency depend on
> the actual board.
>
> Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
> resp. external clock) for the Baud Rate Generator for External Clock
> (BRG) to all SCIF and HSCIF device nodes.
>
> This increases the range and accuracy of supported baud rates on
> (H)SCIF.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a7795.dtsi | 74 +++++++++++++++++++----------
> 1 file changed, 52 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index
> 53a2a8fb42b7480c..25900761cfde201e 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -84,6 +84,14 @@
> status = "disabled";
> };
>
> + /* External SCIF clock - to be overridden by boards that provide it */
> + scif_clk: scif {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + status = "disabled";
> + };
I have mixed feelings about this. Defining an external clock that isn't
present on the board isn't very clean, even more so when the clock has such a
generic name. Wouldn't it be better to let board files define the clock when
they need it ? I know it would require board files to override the clocks and
clock-names property too. Maybe we need to extend the DTS syntax to allow
extending list properties instead of overriding them completely ?
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&gic>;
> @@ -362,8 +370,10 @@
> compatible = "renesas,hscif-r8a7795", "renesas,hscif";
> reg = <0 0xe6540000 0 96>;
> interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 520>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 520>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x31>, <&dmac1 0x30>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -374,8 +384,10 @@
> compatible = "renesas,hscif-r8a7795", "renesas,hscif";
> reg = <0 0xe6550000 0 96>;
> interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 519>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 519>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x33>, <&dmac1 0x32>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -386,8 +398,10 @@
> compatible = "renesas,hscif-r8a7795", "renesas,hscif";
> reg = <0 0xe6560000 0 96>;
> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 518>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 518>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x35>, <&dmac1 0x34>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -398,8 +412,10 @@
> compatible = "renesas,hscif-r8a7795", "renesas,hscif";
> reg = <0 0xe66a0000 0 96>;
> interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 517>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 517>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac0 0x37>, <&dmac0 0x36>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -410,8 +426,10 @@
> compatible = "renesas,hscif-r8a7795", "renesas,hscif";
> reg = <0 0xe66b0000 0 96>;
> interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 516>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 516>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac0 0x39>, <&dmac0 0x38>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -422,8 +440,10 @@
> compatible = "renesas,scif-r8a7795", "renesas,scif";
> reg = <0 0xe6e60000 0 64>;
> interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 207>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 207>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x51>, <&dmac1 0x50>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -434,8 +454,10 @@
> compatible = "renesas,scif-r8a7795", "renesas,scif";
> reg = <0 0xe6e68000 0 64>;
> interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 206>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 206>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x53>, <&dmac1 0x52>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -446,8 +468,10 @@
> compatible = "renesas,scif-r8a7795", "renesas,scif";
> reg = <0 0xe6e88000 0 64>;
> interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 310>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 310>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x13>, <&dmac1 0x12>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -458,8 +482,10 @@
> compatible = "renesas,scif-r8a7795", "renesas,scif";
> reg = <0 0xe6c50000 0 64>;
> interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 204>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 204>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac0 0x57>, <&dmac0 0x56>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -470,8 +496,10 @@
> compatible = "renesas,scif-r8a7795", "renesas,scif";
> reg = <0 0xe6c40000 0 64>;
> interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 203>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 203>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac0 0x59>, <&dmac0 0x58>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
> @@ -482,8 +510,10 @@
> compatible = "renesas,scif-r8a7795", "renesas,scif";
> reg = <0 0xe6f30000 0 64>;
> interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 202>;
> - clock-names = "fck";
> + clocks = <&cpg CPG_MOD 202>,
> + <&cpg CPG_CORE R8A7795_CLK_S3D1>,
> + <&scif_clk>;
> + clock-names = "fck", "int_clk", "scif_clk";
> dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
> dma-names = "tx", "rx";
> power-domains = <&cpg>;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
