When 8250 driver doesn't have its own hardware RS485 support and doesn't want to override rs485_config callback,
then default serial8250_rs485_config is used. It just stores supplied by user-space config.
Signed-off-by: Matwey V. Kornilov <matwey@xxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 271d121..d123fbd 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -395,6 +395,12 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
}
}
#endif
+static int serial8250_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ port->rs485 = *rs485;
+ return 0;
+}
static const struct uart_ops *base_ops;
static struct uart_ops univ8250_port_ops;
@@ -987,6 +993,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.rs485 = up->port.rs485;
uart->dma = up->dma;
+ /* Use software RS485 support when hardware one is not available */
+ if (!(uart->capabilities & UART_CAP_HW485) && !uart->port.rs485_config)
+ uart->port.rs485_config = serial8250_rs485_config;
+
/* Take tx_loadsz from fifosize if it wasn't set separately */
if (uart->port.fifosize && !uart->tx_loadsz)
uart->tx_loadsz = uart->port.fifosize;
--
2.6.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
