The .get_mctrl callback should not report the status of RTS or LOOP, so
drop this. Instead implement reporting the state of CAR (aka DCD) and
RI.
For .set_mctrl implement setting the DTR line.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/imx.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index fe3d41cc8416..8c4c39b5b4ae 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -147,8 +147,11 @@
#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_RIDELT (1<<10) /* Ring Interrupt Delta */
+#define USR2_RIIN (1<<9) /* Ring Indicator Input */
#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */
#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
#define USR2_TXDC (1<<3) /* Transmitter complete */
#define USR2_BRCD (1<<2) /* Break condition */
@@ -799,16 +802,19 @@ static unsigned int imx_tx_empty(struct uart_port *port)
static unsigned int imx_get_mctrl(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
- unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+ unsigned int tmp = TIOCM_DSR;
+ unsigned usr1 = readl(sport->port.membase + USR1);
- if (readl(sport->port.membase + USR1) & USR1_RTSS)
+ if (usr1 & USR1_RTSS)
tmp |= TIOCM_CTS;
- if (readl(sport->port.membase + UCR2) & UCR2_CTS)
- tmp |= TIOCM_RTS;
+ /* in DCE mode DCDIN is always 0 */
+ if (!(usr1 & USR2_DCDIN))
+ tmp |= TIOCM_CAR;
- if (readl(sport->port.membase + uts_reg(sport)) & UTS_LOOP)
- tmp |= TIOCM_LOOP;
+ /* in DCE mode RIIN is always 0 */
+ if (readl(sport->port.membase + USR2) & USR2_RIIN)
+ tmp |= TIOCM_RI;
return tmp;
}
@@ -826,6 +832,11 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
writel(temp, sport->port.membase + UCR2);
}
+ temp = readl(sport->port.membase + UCR3) & ~UCR3_DSR;
+ if (!(mctrl & TIOCM_DTR))
+ temp |= UCR3_DSR;
+ writel(temp, sport->port.membase + UCR3);
+
temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP;
if (mctrl & TIOCM_LOOP)
temp |= UTS_LOOP;
--
2.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
