On Tue, Sep 08, 2015 at 12:38:59PM -0400, Mark Salter wrote:
> On Tue, 2015-09-08 at 13:43 +0100, Leif Lindholm wrote:
> > The ACPI DBG2 table defines a debug console. Add support for parsing it
> > and using it to select earlycon destination when no arguments provided.
> >
> > Signed-off-by: Leif Lindholm <leif.lindholm@xxxxxxxxxx>
> > ---
> > arch/arm64/kernel/acpi.c | 2 +
> > drivers/acpi/Makefile | 1 +
> > drivers/acpi/console.c | 103 ++++++++++++++++++++++++++++++++++++++++++
> > drivers/of/fdt.c | 2 +-
> > drivers/tty/serial/earlycon.c | 16 ++++---
> > include/linux/acpi.h | 4 ++
> > include/linux/serial_core.h | 9 ++--
> > 7 files changed, 126 insertions(+), 11 deletions(-)
> > create mode 100644 drivers/acpi/console.c
> >
> > diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> > index b9a5623..be7600a 100644
> > --- a/arch/arm64/kernel/acpi.c
> > +++ b/arch/arm64/kernel/acpi.c
> > @@ -207,6 +207,8 @@ void __init acpi_boot_table_init(void)
> > if (!param_acpi_force)
> > disable_acpi();
> > }
> > +
> > + acpi_early_console_probe();
> > }
> >
> > void __init acpi_gic_init(void)
> > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> > index b5e7cd8..a89587d 100644
> > --- a/drivers/acpi/Makefile
> > +++ b/drivers/acpi/Makefile
> > @@ -10,6 +10,7 @@ ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
> > #
> > obj-y += tables.o
> > obj-$(CONFIG_X86) += blacklist.o
> > +obj-y += console.o
>
> obj-$(CONFIG_SERIAL_EARLYCON) += console.o
>
> to eliminate whole-file #ifdef
Yes, that makes more sense for this patch standalone, but I felt it
would be a bit weird to add the conditionality here only to delete it
in the subsequent patch. I don't feel strongly about it.
> >
> > #
> > # ACPI Core Subsystem (Interpreter)
> > diff --git a/drivers/acpi/console.c b/drivers/acpi/console.c
> > new file mode 100644
> > index 0000000..a985890
> > --- /dev/null
> > +++ b/drivers/acpi/console.c
> > @@ -0,0 +1,103 @@
> > +/*
> > + * Copyright (c) 2012, Intel Corporation
> > + * Copyright (c) 2015, Linaro Ltd.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + */
> > +
> > +#define DEBUG
> > +#define pr_fmt(fmt) "ACPI: " KBUILD_MODNAME ": " fmt
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/kernel.h>
> > +#include <linux/serial_core.h>
> > +
> > +#define NUM_ELEMS(x) (sizeof(x) / sizeof(*x))
> > +
> > +#ifdef CONFIG_SERIAL_EARLYCON
> > +static int use_earlycon __initdata;
> > +static int __init setup_acpi_earlycon(char *buf)
> > +{
> > + if (!buf)
> > + use_earlycon = 1;
> > +
> > + return 0;
> > +}
> > +early_param("earlycon", setup_acpi_earlycon);
> > +
> > +extern struct earlycon_id __earlycon_table[];
> > +
> > +static __initdata struct {
> > + int id;
> > + const char *name;
> > +} subtypes[] = {
> > + {0, "uart8250"},
> > + {1, "uart8250"},
> > + {2, NULL},
> > + {3, "pl011"},
> > +};
>
> Instead of having a table here, why not have an ACPI_EARLYCON_DECLARE()
> where individual drivers can provide an id similar to OF_EARLYCON_DECLARE()
> providing compatible strings?
The IDs are defined by the DBG2 specification, so it felt more
natural to encapsulate it here. However, a comment to that effect
would be useful. Or would you still prefer
ACPI_EARLYCON_DECLARE(0, uart8250)
ACPI_EARLYCON_DECLARE(1, uart8250)
...
?
> > +
> > +static int __init acpi_setup_earlycon(unsigned long addr, const char *driver)
> > +{
> > + const struct earlycon_id *match;
> > +
> > + for (match = __earlycon_table; match->name[0]; match++)
> > + if (strcmp(driver, match->name) == 0)
> > + return setup_earlycon_driver(addr, match->setup);
> > +
> > + return -ENODEV;
> > +}
> > +
> > +static int __init acpi_parse_dbg2(struct acpi_table_header *table)
> > +{
> > + struct acpi_table_dbg2 *dbg2;
> > + struct acpi_dbg2_device *entry;
> > + void *tbl_end;
> > +
> > + dbg2 = (struct acpi_table_dbg2 *)table;
> > + if (!dbg2) {
> > + pr_debug("DBG2 not present.\n");
> > + return -ENODEV;
> > + }
> > +
> > + tbl_end = (void *)table + table->length;
> > +
> > + entry = (struct acpi_dbg2_device *)((void *)dbg2 + dbg2->info_offset);
> > +
> > + while (((void *)entry) + sizeof(struct acpi_dbg2_device) < tbl_end) {
> > + struct acpi_generic_address *addr;
> > +
> > + if (entry->revision != 0) {
> > + pr_debug("DBG2 revision %d not supported.\n",
> > + entry->revision);
> > + return -ENODEV;
> > + }
> > +
> > + addr = (void *)entry + entry->base_address_offset;
> > +
> > + pr_debug("DBG2 PROBE - console (%04x:%04x).\n",
> > + entry->port_type, entry->port_subtype);
> > +
> > + if (use_earlycon &&
> > + (entry->port_type == ACPI_DBG2_SERIAL_PORT) &&
> > + (entry->port_subtype < NUM_ELEMS(subtypes)))
> > + acpi_setup_earlycon(addr->address,
> > + subtypes[entry->port_subtype].name);
>
> Don't we need to handle space_id (and bit width) as well as address?
space_id? bit width?
DBG2 is for quite primitive debug ports, already initialised by
formware (or other pre-kernel agent).
> > +
> > + entry = (struct acpi_dbg2_device *)
> > + ((void *)entry + entry->length);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int __init acpi_early_console_probe(void)
> > +{
> > + acpi_table_parse(ACPI_SIG_DBG2, acpi_parse_dbg2);
> > +
> > + return 0;
> > +}
> > +#endif /* CONFIG_SERIAL_EARLYCON */
> > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
> > index fcfc4c7..a96209f 100644
> > --- a/drivers/of/fdt.c
> > +++ b/drivers/of/fdt.c
> > @@ -829,7 +829,7 @@ int __init early_init_dt_scan_chosen_serial(void)
> > if (!addr)
> > return -ENXIO;
> >
> > - of_setup_earlycon(addr, match->data);
> > + setup_earlycon_driver(addr, match->data);
> > return 0;
> > }
> > return -ENODEV;
> > diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> > index 2bda09a..c063cbb 100644
> > --- a/drivers/tty/serial/earlycon.c
> > +++ b/drivers/tty/serial/earlycon.c
> > @@ -13,6 +13,7 @@
> >
> > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> >
> > +#include <linux/acpi.h>
> > #include <linux/console.h>
> > #include <linux/kernel.h>
> > #include <linux/init.h>
> > @@ -184,12 +185,16 @@ static int __init param_setup_earlycon(char *buf)
> > int err;
> >
> > /*
> > - * Just 'earlycon' is a valid param for devicetree earlycons;
> > - * don't generate a warning from parse_early_params() in that case
> > + * Just 'earlycon' is a valid param for devicetree or ACPI earlycons;
> > + * ACPI cannot be parsed yet, so return without action if enabled.
> > + * Otherwise, attempt initialization using DT.
> > */
> > - if (!buf || !buf[0])
> > - if (IS_ENABLED(CONFIG_OF_FLATTREE))
> > + if (!buf || !buf[0]) {
> > + if (!acpi_disabled)
>
> How do we know for sure that "acpi" has been parsed before "earlycon"?
Because "arch" comes before "drivers" in kernel image link order.
*twitch*
Yes, not the best argument ever.
> > + return 0;
> > + else if (IS_ENABLED(CONFIG_OF_FLATTREE))
> > return early_init_dt_scan_chosen_serial();
> > + }
> >
> > err = setup_earlycon(buf);
> > if (err == -ENOENT || err == -EALREADY)
> > @@ -198,8 +203,7 @@ static int __init param_setup_earlycon(char *buf)
> > }
> > early_param("earlycon", param_setup_earlycon);
> >
> > -int __init of_setup_earlycon(unsigned long addr,
> > - int (*setup)(struct earlycon_device *, const char *))
> > +int __init setup_earlycon_driver(unsigned long addr, earlycon_initfunc_t setup)
> > {
> > int err;
> > struct uart_port *port = &early_console_dev.port;
> > diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> > index 7235c48..88cb9c1 100644
> > --- a/include/linux/acpi.h
> > +++ b/include/linux/acpi.h
> > @@ -811,4 +811,8 @@ static inline struct acpi_device *acpi_get_next_child(struct device *dev,
> >
> > #endif
> >
> > +#if defined(CONFIG_ACPI) && defined(CONFIG_SERIAL_EARLYCON)
> > +int __init acpi_early_console_probe(void);
> > +#endif
> > +
> > #endif /*_LINUX_ACPI_H*/
> > diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> > index 297d4fa..39e99b0 100644
> > --- a/include/linux/serial_core.h
> > +++ b/include/linux/serial_core.h
> > @@ -339,14 +339,15 @@ struct earlycon_device {
> > unsigned int baud;
> > };
> >
> > +typedef int (*earlycon_initfunc_t)(struct earlycon_device *, const char *);
> > +
> > struct earlycon_id {
> > - char name[16];
> > - int (*setup)(struct earlycon_device *, const char *options);
> > + char name[16];
> > + earlycon_initfunc_t setup;
> > } __aligned(32);
> >
> > extern int setup_earlycon(char *buf);
> > -extern int of_setup_earlycon(unsigned long addr,
> > - int (*setup)(struct earlycon_device *, const char *));
> > +extern int setup_earlycon_driver(unsigned long addr, earlycon_initfunc_t setup);
> >
> > #define EARLYCON_DECLARE(_name, func) \
> > static const struct earlycon_id __earlycon_##_name \
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
