Re: [PATCH] serial: core: prevent softlockups on slow consoles

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 04, 2015 at 09:19:38AM +0200, Vitaly Kuznetsov wrote:
> Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> writes:
> 
> > On Mon, Aug 31, 2015 at 04:34:16PM +0200, Vitaly Kuznetsov wrote:
> >> Hyper-V serial port is very slow on multi-vCPU guest, this causes
> >> soflockups on intensive console writes. Touch nmi watchdog after putting
> >> every char on port to avoid the issue for all serial drivers, the overhead
> >> should be small.
> >> 
> >> This is just a part of the fix: serial8250_console_write() disables irqs
> >> for all its execution time (which on such slow consoles can be dozens of
> >> seconds), it should be possible to observe devices being stuck on this
> >> CPU. We need to find a better way, e.g. do output in batches enabling irqs
> >> in between.
> >> 
> >> Signed-off-by: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
> >> ---
> >>  drivers/tty/serial/serial_core.c | 3 ++-
> >>  1 file changed, 2 insertions(+), 1 deletion(-)
> >> 
> >> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> >> index f368520..cc05785 100644
> >> --- a/drivers/tty/serial/serial_core.c
> >> +++ b/drivers/tty/serial/serial_core.c
> >> @@ -33,7 +33,7 @@
> >>  #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
> >>  #include <linux/serial_core.h>
> >>  #include <linux/delay.h>
> >> -#include <linux/mutex.h>
> >> +#include <linux/nmi.h>
> >>  
> >>  #include <asm/irq.h>
> >>  #include <asm/uaccess.h>
> >> @@ -1792,6 +1792,7 @@ void uart_console_write(struct uart_port *port, const char *s,
> >>  		if (*s == '\n')
> >>  			putchar(port, '\r');
> >>  		putchar(port, *s);
> >> +		touch_nmi_watchdog();
> >
> > I don't like this, please narrow this down to the real problem that your
> > hardware has here, the putchar function should not be this slow.  If it
> > is, something is wrong.
> 
> I'm afraid this is really the case:
> 
> 3)               |                                          serial8250_console_putchar() {
> 3)               |                                            wait_for_xmitr() {
> 3) # 3111.189 us |                                              io_serial_in();
> 3) # 3115.334 us |                                            }
> 3) # 2234.099 us |                                            io_serial_out();
> 3) # 5353.883 us |                                          }
> 
> This is one char and I use local pipe for Hyper-V output. In case
> something like remote pipe is in use ...
> 
> So I'm sorry, but I don't really understand the suggestion to 'narrow
> this down' - this is how slow Hyper-V serial's implementation is,
> io_serial_in() is just an inb() and io_serial_out() is an outb().

So a call to inb() and outb() really takes that long?  Again, this is
broken somewhere in the hypervisor, or you need to fix up the platform
logic for inb() and outb() to properly kick the watchdog.  Perhaps
hyperv needs its own arch type for this kind of crud?

Don't "paper over" the real issue here please.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux