Since the serial core is informed that this device is doing
automatic flow control, it is not necessary to alter CTS and
DCTS of the MSR as the core no longer attempts stop the port
in uart_handle_cts_change().
Signed-off-by: Huiquan Zhong <huiquan.zhong@xxxxxxxxx>
Signed-off-by: Qipeng Zha <qipeng.zha@xxxxxxxxx>
---
change in V3:
update subject and commit message per Kryger's suggestion.
change in V2:
update subject line and commit message.
---
drivers/tty/serial/8250/8250_dw.c | 22 ----------------------
1 file changed, 22 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f78afeb..1f15cb1 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -57,7 +57,6 @@
struct dw8250_data {
u8 usr_reg;
- int last_mcr;
int line;
int msr_mask_on;
int msr_mask_off;
@@ -77,12 +76,6 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
- /* If reading MSR, report CTS asserted when auto-CTS/RTS enabled */
- if (offset == UART_MSR && d->last_mcr & UART_MCR_AFE) {
- value |= UART_MSR_CTS;
- value &= ~UART_MSR_DCTS;
- }
-
/* Override any modem control signals if needed */
if (offset == UART_MSR) {
value |= d->msr_mask_on;
@@ -102,11 +95,6 @@ static void dw8250_force_idle(struct uart_port *p)
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_MCR)
- d->last_mcr = value;
-
writeb(value, p->membase + (offset << p->regshift));
/* Make sure LCR write wasn't ignored */
@@ -145,11 +133,6 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_MCR)
- d->last_mcr = value;
-
value &= 0xff;
__raw_writeq(value, p->membase + (offset << p->regshift));
/* Read back to ensure register write ordering. */
@@ -176,11 +159,6 @@ static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_MCR)
- d->last_mcr = value;
-
writel(value, p->membase + (offset << p->regshift));
/* Make sure LCR write wasn't ignored */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
