[ +cc Felipe ]
Hi Laszlo,
On 08/06/2015 10:03 AM, Laszlo Papp wrote:
> On Thu, Aug 6, 2015 at 2:52 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
>> On Thu, 6 Aug 2015, Laszlo Papp wrote:
>>> On Wed, Aug 5, 2015 at 7:15 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
>>>> On Wed, 5 Aug 2015, Greg KH wrote:
>>>>
>>>>> hm, wait, is this really the n_gsm line discipline? Or is it something
>>>>> else?
>>>>>
>>>>> g_serial is the device side of a serial connection, there is no "cable
>>>>> removed" notification that it even knows about, that has to come from
>>>>> the gadget driver somehow, which you should listen for and then kick
>>>>> your userspace program.
>>>>
>>>> There is the gserial_disconnect() callback, which gets invoked when the
>>>> Vbus power (provided by the host) is removed. It's a pretty good
>>>> indicator that the USB cable has been unplugged.
>>>>
>>>> I don't understand all the stuff that gserial_disconnect() does, but it
>>>> ought to be more or less equivalent to a "hangup" -- as the kerneldoc
>>>> says. If it doesn't do what users expect, there's probably a bug
>>>> somewhere.
>>>>
>>>> Of course, it's possible that the callback does not get invoked in
>>>> Laszlo's case. Then the question would be: Why not?
>>>
>>> Hmm, that is a good question. I wonder if there had been any recent
>>> fixes for that lately... I suppose that I will need to skim through
>>> the git log. Thank you for the hints!
>>
>> You should also add a printk statement to the disconnect callback so
>> that you can verify whether it really is getting called.
>
> Thanks. Should that also be called if I just boot up the board with
> Linux on it while the cable is not attached. In other words, the
> problem that I am also experiencing is that it blocks even when no
> cable is attached to the board and there has been no cable ever
> attached for the last boot.
You have everyone hopelessly confused about what your problem actually is.
Your $subject says that "g_serial hangs on write" and for a reproducer
you provide:
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main()
{
const char buf[] = "Hello World!\n";
int fd = open("/dev/ttyGS0", O_RDWR | O_NONBLOCK);
int sent = write(fd, buf, sizeof(buf)-1);
close(fd);
return 0;
}
Only a careful reader would have caught this in your subsequent reply:
On Wed, Aug 05, 2015 at 04:40:21PM +0100, Laszlo Papp wrote:
> Wow, I managed to mess it up in my original email! So, this code above
> made it working, but without O_NONBLOCK, it was not working. Using
> O_NONBLOCK is my current nasty workaround.
To answer your original question, yes, the write() is behaving as expected.
If you open a tty without O_NONBLOCK, then both read() and write() to that
tty will _block_ until the operation is successful or the tty is hung up.
Your comparison with how ttyS* ports behave when a cable is not connected
is based on incorrect assumptions. When a ttyS port is in CLOCAL mode
(the default), the cable state is ignored when _opening_. On write(),
without hardware flow control (CRTSCTS), the serial port is successfully
writing the data out without knowing that nothing is listening.
I don't see a bug here.
Regards,
Peter Hurley
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
