On Thu, May 7, 2015 at 5:24 PM, Sebastian Andrzej Siewior
<sebastian@xxxxxxxxxxxxx> wrote:
> From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
>
> This basically reverts commit 068500e08dc8 ("serial: imx: initialized
> DMA w/o HW flow enabled") simply because it does not work as expected
> without additional magic which I am not aware of. The DMA mode is only
> used for non-console UARTs so the "standard" boot test won't notice this.
>
> I tested it on various IMX6 (S and Q) boards and the default SDMA firmware
> that is included in ROM does work properly. The SDMA interrupt counter does
> not stop increment (which means the SDMA does not stop working or the ACK
> is working) and I see a lot of 0x00 (sometimes other bytes) which are added
> to the tty buffer which are not part of the data transfer.
> Jiada claimed that there is a firmware which makes it work but failed to
> provide me a link to the firmware. All he said was that it can not be
> shipped as part of the kernel due to license issues. I've found a firmware
> blob in the FSL-tree but this firmware causes only TTY-overflows an *no*
> data is transmitted.
>
> Currently I see no other way out.
>
> Fixes: 068500e08dc8 ("serial: imx: initialized DMA w/o HW flow enabled")
> Cc: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
> Cc: Jiada Wang <jiada_wang@xxxxxxxxxx>
> Cc: nicolae.rosia@xxxxxxxxx
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Thanks, this fixes Bluetooth operation on a imx6sl-warp running
without SDMA firmware.
Two suggestions:
1. You should Cc stable as it affects 4.0 also
2. It doesn't apply cleanly against linux-next, so I think Greg will
have problems applying it.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
