Add the register definitions for the Serial Port Control and Data
Registers on SCIFA/SCIFB, which are needed for RTS/CTS pin control.
Extracted from patches by Magnus Damm <damm+renesas@xxxxxxxxxxxxx>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/tty/serial/sh-sci.c | 22 ++++++++++++++++++++++
drivers/tty/serial/sh-sci.h | 10 ++++++++++
2 files changed, 32 insertions(+)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e7d6566fafaf3da5..7ee0f686bdf1b216 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -168,6 +168,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -188,6 +190,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -207,6 +211,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = { 0x30, 16 },
+ [SCPDR] = { 0x34, 16 },
},
/*
@@ -226,6 +232,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = { 0x30, 16 },
+ [SCPDR] = { 0x34, 16 },
},
/*
@@ -246,6 +254,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -265,6 +275,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -284,6 +296,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -303,6 +317,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
[HSSRR] = { 0x40, 16 },
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -323,6 +339,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = { 0x24, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -343,6 +361,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x24, 16 },
[SCLSR] = { 0x28, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -363,6 +383,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
};
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 8b4447e66708aea5..2bae842fb0fc0ae6 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -24,6 +24,8 @@ enum {
SCRFDR, /* Receive FIFO Data Count Register */
SCSPTR, /* Serial Port Register */
HSSRR, /* Sampling Rate Register */
+ SCPCR, /* Serial Port Control Register */
+ SCPDR, /* Serial Port Data Register */
SCIx_NR_REGS,
};
@@ -79,6 +81,14 @@ enum {
/* HSSRR HSCIF */
#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */
+/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
+#define SCPCR_RTSC (1 << 4) /* Serial Port RTS Pin / Output Pin */
+#define SCPCR_CTSC (1 << 3) /* Serial Port CTS Pin / Input Pin */
+
+/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
+#define SCPDR_RTSD (1 << 4) /* Serial Port RTS Output Pin Data */
+#define SCPDR_CTSD (1 << 3) /* Serial Port CTS Input Pin Data */
+
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
