On Tue, Apr 21, 2015 at 03:46:27PM +0100, Paul Burton wrote:
> This series introduces initial support for the Ingenic JZ4780 SoC and
> the Imagination Technologies MIPS Creator CI20 board which is built
> around it. In the process the existing JZ4740 & qi_lb60 code gains
> initial support for using DeviceTree such that much of the existing
> platform code under arch/mips/jz4740 can be shared.
>
> The series has undergone quite a bit of restructure since v2. Each
> patch contains a changelog indicating its differences, but a rough
> overview for changes across the series would be:
>
> - s/jz47xx/ingenic/ in various places, to reflect the fact that
> Ingenic have changed the naming scheme for their newest SoCs
> (now Mxxx).
>
> - Restructure the Kconfig entries to provide a MACH_INGENIC
> indicating and Ingenic SoC, and have boards select the
> appropriate SoC symbol.
>
> - Merge DT binding documentation where SoC bindings differ only
> by compatible strings.
>
> - Capitalise "JZ" in SoC names, where not identifiers in code,
> to match the way Ingenic write them.
>
> - Further clean up the Ingenic SoC interrupt controller driver
> and move it under drivers/irqchip/.
>
> Review appreciated, and hopefully this can make it into v4.2.
(Of course I forgot something... This applies atop next-20150421 :) )
Thanks,
Paul
> Thanks,
> Paul
>
> Paul Burton (37):
> devicetree/bindings: add Ingenic Semiconductor vendor prefix
> devicetree/bindings: add Qi Hardware vendor prefix
> MIPS: JZ4740: introduce CONFIG_MACH_INGENIC
> MIPS: ingenic: add newer vendor IDs
> MIPS: JZ4740: require & include DT
> MIPS: irq_cpu: declare irqchip table entry
> MIPS: JZ4740: probe CPU interrupt controller via DT
> MIPS: JZ4740: use generic plat_irq_dispatch
> MIPS: JZ4740: move arch_init_irq out of arch/mips/jz4740/irq.c
> devicetree: document Ingenic SoC interrupt controller binding
> MIPS: JZ4740: probe interrupt controller via DT
> MIPS: JZ4740: parse SoC interrupt controller parent IRQ from DT
> MIPS: JZ4740: register an irq_domain for the interrupt controller
> MIPS: JZ4740: drop intc debugfs code
> MIPS: JZ4740: remove jz_intc_base global
> MIPS: JZ4740: support >32 interrupts
> MIPS: JZ4740: define IRQ numbers based on number of intc IRQs
> MIPS: JZ4740: read intc base address from DT
> MIPS: JZ4740: avoid JZ4740-specific naming
> MIPS: JZ4740: support newer SoC interrupt controllers
> irqchip: move Ingenic SoC intc driver to drivers/irqchip
> MIPS: JZ4740: call jz4740_clock_init earlier
> MIPS: JZ4740: replace use of jz4740_clock_bdata
> devicetree: add Ingenic CGU binding documentation
> clk: ingenic: add driver for Ingenic SoC CGU clocks
> MIPS,clk: migrate JZ4740 to common clock framework
> MIPS,clk: move jz4740_clock_set_wait_mode to jz4740-cgu
> MIPS,clk: move jz4740 UDC auto suspend functions to jz4740-cgu
> MIPS,clk: move jz4740 clock suspend,resume functions to jz4740-cgu
> clk: ingenic: add JZ4780 CGU support
> MIPS: JZ4740: remove clock.h
> MIPS: JZ4740: only detect RAM size if not specified in DT
> devicetree: document Ingenic SoC UART binding
> serial: 8250_ingenic: support for Ingenic SoC UARTs
> MIPS: JZ4740: use Ingenic SoC UART driver
> MIPS: ingenic: initial JZ4780 support
> MIPS: ingenic: initial MIPS Creator CI20 support
>
> .../devicetree/bindings/clock/ingenic,cgu.txt | 53 ++
> .../bindings/interrupt-controller/ingenic,intc.txt | 25 +
> .../devicetree/bindings/serial/ingenic,uart.txt | 22 +
> .../devicetree/bindings/vendor-prefixes.txt | 2 +
> arch/mips/Kconfig | 11 +-
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/ingenic/Makefile | 10 +
> arch/mips/boot/dts/ingenic/ci20.dts | 21 +
> arch/mips/boot/dts/ingenic/jz4740.dtsi | 68 ++
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 101 +++
> arch/mips/boot/dts/ingenic/qi_lb60.dts | 15 +
> arch/mips/configs/ci20_defconfig | 169 ++++
> arch/mips/configs/qi_lb60_defconfig | 3 +-
> arch/mips/include/asm/cpu-type.h | 2 +-
> arch/mips/include/asm/cpu.h | 6 +-
> arch/mips/include/asm/mach-jz4740/clock.h | 3 +
> .../asm/mach-jz4740/cpu-feature-overrides.h | 3 -
> arch/mips/include/asm/mach-jz4740/irq.h | 14 +-
> arch/mips/include/asm/mach-jz4740/platform.h | 2 -
> arch/mips/jz4740/Kconfig | 17 +-
> arch/mips/jz4740/Makefile | 8 +-
> arch/mips/jz4740/Platform | 8 +-
> arch/mips/jz4740/board-qi_lb60.c | 7 -
> arch/mips/jz4740/clock-debugfs.c | 108 ---
> arch/mips/jz4740/clock.c | 924 ---------------------
> arch/mips/jz4740/clock.h | 76 --
> arch/mips/jz4740/gpio.c | 7 +-
> arch/mips/jz4740/irq.c | 162 ----
> arch/mips/jz4740/platform.c | 38 +-
> arch/mips/jz4740/pm.c | 2 -
> arch/mips/jz4740/prom.c | 13 -
> arch/mips/jz4740/reset.c | 13 +-
> arch/mips/jz4740/serial.c | 33 -
> arch/mips/jz4740/serial.h | 23 -
> arch/mips/jz4740/setup.c | 36 +-
> arch/mips/jz4740/time.c | 19 +-
> arch/mips/kernel/cpu-probe.c | 4 +-
> arch/mips/kernel/irq_cpu.c | 3 +
> drivers/clk/Makefile | 1 +
> drivers/clk/ingenic/Makefile | 3 +
> drivers/clk/ingenic/cgu.c | 711 ++++++++++++++++
> drivers/clk/ingenic/cgu.h | 223 +++++
> drivers/clk/ingenic/jz4740-cgu.c | 301 +++++++
> drivers/clk/ingenic/jz4780-cgu.c | 732 ++++++++++++++++
> drivers/irqchip/Kconfig | 5 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-ingenic.c | 171 ++++
> drivers/tty/serial/8250/8250_ingenic.c | 261 ++++++
> drivers/tty/serial/8250/Kconfig | 9 +
> drivers/tty/serial/8250/Makefile | 3 +
> include/dt-bindings/clock/jz4740-cgu.h | 37 +
> include/dt-bindings/clock/jz4780-cgu.h | 88 ++
> .../irq.h => include/linux/irqchip/ingenic.h | 8 +-
> 53 files changed, 3162 insertions(+), 1424 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,cgu.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
> create mode 100644 Documentation/devicetree/bindings/serial/ingenic,uart.txt
> create mode 100644 arch/mips/boot/dts/ingenic/Makefile
> create mode 100644 arch/mips/boot/dts/ingenic/ci20.dts
> create mode 100644 arch/mips/boot/dts/ingenic/jz4740.dtsi
> create mode 100644 arch/mips/boot/dts/ingenic/jz4780.dtsi
> create mode 100644 arch/mips/boot/dts/ingenic/qi_lb60.dts
> create mode 100644 arch/mips/configs/ci20_defconfig
> delete mode 100644 arch/mips/jz4740/clock-debugfs.c
> delete mode 100644 arch/mips/jz4740/clock.c
> delete mode 100644 arch/mips/jz4740/clock.h
> delete mode 100644 arch/mips/jz4740/irq.c
> delete mode 100644 arch/mips/jz4740/serial.c
> delete mode 100644 arch/mips/jz4740/serial.h
> create mode 100644 drivers/clk/ingenic/Makefile
> create mode 100644 drivers/clk/ingenic/cgu.c
> create mode 100644 drivers/clk/ingenic/cgu.h
> create mode 100644 drivers/clk/ingenic/jz4740-cgu.c
> create mode 100644 drivers/clk/ingenic/jz4780-cgu.c
> create mode 100644 drivers/irqchip/irq-ingenic.c
> create mode 100644 drivers/tty/serial/8250/8250_ingenic.c
> create mode 100644 include/dt-bindings/clock/jz4740-cgu.h
> create mode 100644 include/dt-bindings/clock/jz4780-cgu.h
> rename arch/mips/jz4740/irq.h => include/linux/irqchip/ingenic.h (74%)
>
> --
> 2.3.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
