The bit masks for RFR_LEVEL1 and STALE_TIMEOUT_MSB values in MR1 and
IPR registers respectively are different for UART and UART_DM hardware
cores. We have been using UART core mask values for these. Add the same
for UART_DM core.
There is no bit setting as UART_IPR_RXSTALE_LAST for UART_DM core so do
it only for UART core.
Signed-off-by: Pramod Gurav <gpramod@xxxxxxxxxxxxxx>
---
Changes since v2:
- Changed the sequnce of code to avoid duplication of code.
drivers/tty/serial/msm_serial.c | 26 ++++++++++++++++++++------
drivers/tty/serial/msm_serial.h | 2 ++
2 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b73889c..99aba04 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -421,7 +421,7 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
{
- unsigned int rxstale, watermark;
+ unsigned int rxstale, watermark, mask;
struct msm_port *msm_port = UART_TO_MSM(port);
const struct msm_baud_map *entry;
@@ -432,8 +432,15 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
/* RX stale watermark */
rxstale = entry->rxstale;
watermark = UART_IPR_STALE_LSB & rxstale;
- watermark |= UART_IPR_RXSTALE_LAST;
- watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+ if (msm_port->is_uartdm)
+ mask = UART_DM_IPR_STALE_TIMEOUT_MSB;
+ else {
+ watermark |= UART_IPR_RXSTALE_LAST;
+ mask = UART_IPR_STALE_TIMEOUT_MSB;
+ }
+
+ watermark |= mask & (rxstale << 2);
+
msm_write(port, watermark, UART_IPR);
/* set RX watermark */
@@ -476,7 +483,7 @@ static void msm_init_clock(struct uart_port *port)
static int msm_startup(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
- unsigned int data, rfr_level;
+ unsigned int data, rfr_level, mask;
int ret;
snprintf(msm_port->name, sizeof(msm_port->name),
@@ -496,11 +503,18 @@ static int msm_startup(struct uart_port *port)
/* set automatic RFR level */
data = msm_read(port, UART_MR1);
- data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+
+ if (msm_port->is_uartdm)
+ mask = UART_DM_MR1_AUTO_RFR_LEVEL1;
+ else
+ mask = UART_MR1_AUTO_RFR_LEVEL1;
+
+ data &= ~mask;
data &= ~UART_MR1_AUTO_RFR_LEVEL0;
- data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+ data |= mask & (rfr_level << 2);
data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
msm_write(port, data, UART_MR1);
+
return 0;
}
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 3e1c713..caf5363 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -20,6 +20,7 @@
#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
+#define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
#define UART_MR1_RX_RDY_CTL (1 << 7)
#define UART_MR1_CTS_CTL (1 << 6)
@@ -78,6 +79,7 @@
#define UART_IPR_RXSTALE_LAST 0x20
#define UART_IPR_STALE_LSB 0x1F
#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
+#define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
#define UART_IPR 0x0018
#define UART_TFWR 0x001C
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
