On Tue, Mar 17, 2015 at 06:02:13PM +0800, Peter Hung wrote: > These series patches works for Fintek F81504/F81508/F81512 PCI to Serial Port. > and patch 0002 is following with patch 0001. > > patch 0001 is just cleanup non-used source code. > patch 0002 is major patch. > > The serial port of our product will failed after wakeup from S3(STR). > > It's due to when the system wakeup from S3(STR), this PCI device's > configuration space from 0x40 to 0x40 + max_port * 0x08 should be > re-configured. If had no re-configure, It's will all zero. > > We move all initialization from pci_fintek_setup() to pci_fintek_init() and > set it to pci_serial_quirks struct .init section. It's will re-init this > device when system wakeup from pciserial_resume_ports(). What changed from version 1? > Peter Hung (2): > serial: 8250_pci: remove non-used var for F81504 > serial: 8250_pci: port failed after wakeup from S3 > > drivers/tty/serial/8250/8250_pci.c | 121 +++++++++++++++---------------------- > 1 file changed, 50 insertions(+), 71 deletions(-) > mode change 100644 => 100755 drivers/tty/serial/8250/8250_pci.c You can't change the mode of a kernel file to executable, that's not allowed, and is a bug somewhere in your editor. Please fix this up and resend the series, I can't take these as-is. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
