[PATCH v2 01/05] serial: sh-sci: Break out default CTS/RTS pin setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>

Break out CTS/RTS pin setup for the default case. We only
care about those pins in case SCIx_HAVE_RTSCTS is set.

Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
---

 Changes since V1:
 - Function name change, thanks Laurent!

 drivers/tty/serial/sh-sci.c |   45 +++++++++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 14 deletions(-)

--- 0001/drivers/tty/serial/sh-sci.c
+++ work/drivers/tty/serial/sh-sci.c	2015-03-19 09:07:40.616799151 +0900
@@ -509,10 +509,29 @@ static void sci_poll_put_char(struct uar
 }
 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
 
-static void sci_init_pins(struct uart_port *port, unsigned int cflag)
+static void sci_init_ctsrts_default(struct uart_port *port, bool hwflow_enabled)
 {
 	struct sci_port *s = to_sci_port(port);
 	struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+	unsigned short status;
+
+	/* If no SCSPTR register exists then skip. Same if hardware flow
+	 * control has been enabled, in such case SCFCR.MCE will be set
+	 * and the SCSPTR configuration is assumed to be overridden.
+	 */
+	if (!reg->size || hwflow_enabled)
+		return;
+
+	status = serial_port_in(port, SCSPTR);
+	status &= ~SCSPTR_CTSIO;
+	status |= SCSPTR_RTSIO;
+	serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
+}
+
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	struct sci_port *s = to_sci_port(port);
+	bool hwflow_enabled = cflag & CRTSCTS;
 
 	/*
 	 * Use port-specific handler if provided.
@@ -522,22 +541,20 @@ static void sci_init_pins(struct uart_po
 		return;
 	}
 
-	/*
-	 * For the generic path SCSPTR is necessary. Bail out if that's
-	 * unavailable, too.
+	/* SCIF hardware with RTS/CTS support needs special setup below.
+	 *
+	 * Please note that if RTS/CTS is available for the hardware
+	 * platform depends on the particular SCIF channel on a certain
+	 * SoC, and how this channel has been hooked up on the actual board.
+	 *
+	 * If the RTS/CTS signals will be used or not depends on what user
+	 * space requests. In case RTS/CTS is available but not requested
+	 * by user space we still need to configure the pins somehow.
 	 */
-	if (!reg->size)
+	if (!(s->cfg->capabilities & SCIx_HAVE_RTSCTS))
 		return;
 
-	if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) &&
-	    ((!(cflag & CRTSCTS)))) {
-		unsigned short status;
-
-		status = serial_port_in(port, SCSPTR);
-		status &= ~SCSPTR_CTSIO;
-		status |= SCSPTR_RTSIO;
-		serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
-	}
+	sci_init_ctsrts_default(port, hwflow_enabled);
 }
 
 static int sci_txfill(struct uart_port *port)
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux