Specify transmit FIFO size which might be different depending on LPUART instance. This makes sure uart_wait_until_sent in serial core getting called, which in turn waits and checks if the FIFO is really empty on shutdown by using the tx_empty callback. Without the call of this callback, the last several characters might not yet be transmitted when closing the serial port. This can be reproduced by simply using echo and redirect the output to a ttyLP device. Signed-off-by: Stefan Agner <stefan@xxxxxxxx> --- Hi Greg, Another two fixes for this driver. I think they both are worthwhile fixes to be part of stable kernels too... -- Stefan drivers/tty/serial/fsl_lpuart.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index b1893f3..7ec9110 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1076,6 +1076,8 @@ static int lpuart_startup(struct uart_port *port) sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); + sport->port.fifosize = sport->txfifo_size; + sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); -- 2.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
