UART drivers which enable modem status interrupts when switching
to N_PPS line discipline need to determine if modem status
interrupts should be disabled when switching from N_PPS.
Specifically, the set_ldisc() notification needs to evaluate
UART_ENABLE_MS() which requires termios->c_cflag.
Convert in-tree UART drivers to new interface.
Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 4 ++--
drivers/tty/serial/amba-pl010.c | 4 ++--
drivers/tty/serial/atmel_serial.c | 4 ++--
drivers/tty/serial/bfin_uart.c | 5 +++--
drivers/tty/serial/clps711x.c | 5 +++--
drivers/tty/serial/serial_core.c | 2 +-
include/linux/serial_core.h | 2 +-
7 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index ca5cfdc..6cfdb7b 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2603,9 +2603,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
}
static void
-serial8250_set_ldisc(struct uart_port *port, int new)
+serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
{
- if (new == N_PPS) {
+ if (termios->c_line == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
serial8250_enable_ms(port);
} else
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2064d31..76e40b3 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -468,9 +468,9 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&uap->port.lock, flags);
}
-static void pl010_set_ldisc(struct uart_port *port, int new)
+static void pl010_set_ldisc(struct uart_port *port, struct ktermios *termios)
{
- if (new == N_PPS) {
+ if (termios->c_line == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
pl010_enable_ms(port);
} else
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 8a84034..a2374d9 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2042,9 +2042,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&port->lock, flags);
}
-static void atmel_set_ldisc(struct uart_port *port, int new)
+static void atmel_set_ldisc(struct uart_port *port, struct ktermios *termios)
{
- if (new == N_PPS) {
+ if (termios->c_line == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
atmel_enable_ms(port);
} else {
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 7da9911..44b27ec 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -944,12 +944,13 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
+static void bfin_serial_set_ldisc(struct uart_port *port,
+ struct ktermios *termios)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
unsigned int val;
- switch (ld) {
+ switch (termios->c_line) {
case N_IRDA:
val = UART_GET_GCTL(uart);
val |= (UMOD_IRDA | RPOLC);
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index acfe317..f963c4c 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -225,13 +225,14 @@ static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
writel(ubrlcr, port->membase + UBRLCR_OFFSET);
}
-static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
+static void uart_clps711x_set_ldisc(struct uart_port *port,
+ struct ktermios *termios)
{
if (!port->line) {
struct clps711x_port *s = dev_get_drvdata(port->dev);
regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
- (ld == N_IRDA) ? SYSCON1_SIREN : 0);
+ (termios->c_line == N_IRDA) ? SYSCON1_SIREN : 0);
}
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 5209eaa..c5fb08c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1247,7 +1247,7 @@ static void uart_set_ldisc(struct tty_struct *tty)
if (uport->ops->set_ldisc) {
mutex_lock(&state->port.mutex);
- uport->ops->set_ldisc(uport, tty->termios.c_line);
+ uport->ops->set_ldisc(uport, &tty->termios);
mutex_unlock(&state->port.mutex);
}
}
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index ad93296..40b4cc4 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -63,7 +63,7 @@ struct uart_ops {
void (*flush_buffer)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
- void (*set_ldisc)(struct uart_port *, int new);
+ void (*set_ldisc)(struct uart_port *, struct ktermios *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
