Add support for the WCH382 2S/1P multi-IO card.
WCH382 is a PCI-E card with 1 LPT and 2 DB9 COM ports detected as
Serial controller: Device 1c00:3250 (rev 10) (prog-if 05 [16850])
Signed-off-by: Sergej Pupykin <ml@xxxxxxxxxxxx>
---
drivers/parport/parport_serial.c | 10 ++++++++++
drivers/tty/serial/8250/8250_pci.c | 21 +++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/parport/parport_serial.c
b/drivers/parport/parport_serial.c
index ee93200..e15b484 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -64,6 +64,7 @@ enum parport_pc_pci_cards {
timedia_9079c,
wch_ch353_1s1p,
wch_ch353_2s1p,
+ wch_ch382_2s1p,
sunix_2s1p,
};
@@ -151,6 +152,7 @@ static struct parport_pc_pci cards[] = {
/* timedia_9079c */ { 1, { { 2, 3 }, } },
/* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
+ /* wch_ch382_2s1p*/ { 1, { { 2, -1}, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
};
@@ -257,6 +259,7 @@ static struct pci_device_id
parport_serial_pci_tbl[] = {
/* WCH CARDS */
{ 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0,
0, wch_ch353_1s1p},
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0,
wch_ch353_2s1p},
+ { 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0,
wch_ch382_2s1p},
/*
* More SUNIX variations. At least one of these has part
number
@@ -494,6 +497,13 @@ static struct pciserial_board
pci_parport_serial_boards[] = {
.base_baud = 115200,
.uart_offset =
8,
},
+ [wch_ch382_2s1p] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud
= 115200,
+ .uart_offset = 8,
+ .first_offset = 0xC0,
+ },
[sunix_2s1p] = {
.flags =
FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
diff --git a/drivers/tty/serial/8250/8250_pci.c
b/drivers/tty/serial/8250/8250_pci.c
index 61830b1..8623533 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1739,6 +1739,16 @@ pci_wch_ch353_setup(struct serial_private
*priv,
return pci_default_setup(priv, board, port, idx);
}
+static int
+pci_wch_ch382_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ port->port.flags |= UPF_FIXED_TYPE;
+ port->port.type = PORT_16850;
+ return pci_default_setup(priv, board, port, idx);
+}
+
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
#define PCI_DEVICE_ID_OCTPRO 0x0001
@@ -1792,6 +1802,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_VENDOR_ID_SUNIX 0x1fd4
#define PCI_DEVICE_ID_SUNIX_1999 0x1999
+#define PCIE_VENDOR_ID_WCH 0x1c00
+#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -2451,6 +2463,14 @@ static struct pci_serial_quirk
pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup =
pci_wch_ch353_setup,
},
+ /* WCH CH382 2S1P card (16750 clone) */
+ {
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device =
PCIE_DEVICE_ID_WCH_CH382_2S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup =
pci_wch_ch382_setup,
+ },
/*
* ASIX devices with FIFO bug
*/
@@ -3536,6 +3556,7 @@ static const struct pci_device_id blacklist[] =
{
/* multi-io cards handled by parport_serial */
{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
+ { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
};
/*
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
