Speculatively register a FIQ resource with KGDB. KGDB will only
accept it if the kgdb/fiq feature is enabled (both with compile time and
runtime switches) and the interrupt controller supports FIQ.
By providing this information to KGDB the serial driver offers
"permission" for KGDB to route the UART interrupt signal from the
drivers own handler to KGDBs FIQ handler (which will eventually use the
UART's polled I/O callbacks to interact with the user). This permission
also implies the amba-pl011 driver has already unmasked RX interrupts
(otherwise the FIQ handler will never trigger).
Signed-off-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxx>
Cc: linux-serial@xxxxxxxxxxxxxxx
---
drivers/tty/serial/amba-pl011.c | 94 ++++++++++++++++++++++++-----------------
1 file changed, 55 insertions(+), 39 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8572f2a..ec8ddc7 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -58,6 +58,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
#include <linux/io.h>
+#include <linux/kgdb.h>
#define UART_NR 14
@@ -1416,8 +1417,61 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&uap->port.lock, flags);
}
+static int pl011_hwinit(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ int retval;
+
+ /* Optionaly enable pins to be muxed in and configured */
+ pinctrl_pm_select_default_state(port->dev);
+
+ /*
+ * Try to enable the clock producer.
+ */
+ retval = clk_prepare_enable(uap->clk);
+ if (retval)
+ return retval;
+
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
+ /* Clear pending error and receive interrupts */
+ writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+ UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+
+ /*
+ * Save interrupts enable mask, and enable RX interrupts in case if
+ * the interrupt is used for NMI entry.
+ */
+ uap->im = readw(uap->port.membase + UART011_IMSC);
+ writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
+
+ if (dev_get_platdata(uap->port.dev)) {
+ struct amba_pl011_data *plat;
+
+ plat = dev_get_platdata(uap->port.dev);
+ if (plat->init)
+ plat->init();
+ }
+ return 0;
+}
+
#ifdef CONFIG_CONSOLE_POLL
+static int pl011_poll_init(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ int retval;
+
+ retval = pl011_hwinit(port);
+
+#ifdef CONFIG_KGDB_FIQ
+ if (retval == 0)
+ kgdb_register_fiq(uap->port.irq);
+#endif
+
+ return retval;
+}
+
static void pl011_quiesce_irqs(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1471,44 +1525,6 @@ static void pl011_put_poll_char(struct uart_port *port,
#endif /* CONFIG_CONSOLE_POLL */
-static int pl011_hwinit(struct uart_port *port)
-{
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- int retval;
-
- /* Optionaly enable pins to be muxed in and configured */
- pinctrl_pm_select_default_state(port->dev);
-
- /*
- * Try to enable the clock producer.
- */
- retval = clk_prepare_enable(uap->clk);
- if (retval)
- return retval;
-
- uap->port.uartclk = clk_get_rate(uap->clk);
-
- /* Clear pending error and receive interrupts */
- writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
- UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
-
- /*
- * Save interrupts enable mask, and enable RX interrupts in case if
- * the interrupt is used for NMI entry.
- */
- uap->im = readw(uap->port.membase + UART011_IMSC);
- writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
-
- if (dev_get_platdata(uap->port.dev)) {
- struct amba_pl011_data *plat;
-
- plat = dev_get_platdata(uap->port.dev);
- if (plat->init)
- plat->init();
- }
- return 0;
-}
-
static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
{
writew(lcr_h, uap->port.membase + uap->lcrh_rx);
@@ -1888,7 +1904,7 @@ static struct uart_ops amba_pl011_pops = {
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
- .poll_init = pl011_hwinit,
+ .poll_init = pl011_poll_init,
.poll_get_char = pl011_get_poll_char,
.poll_put_char = pl011_put_poll_char,
#endif
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
