Re: [PATCH 10/13] tty: serial: omap: remove some dead code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 23 Apr 2014 20:21:00 -0500 Felipe Balbi <balbi@xxxxxx> wrote:

> I have no problem either way, just that unused code doesn't have to be
> sitting in the tree and I'm not entirely sure this GPIO should be
> handled by omap-serial.c, perhaps something more generic inside
> serial-core so other UART drivers can benefit from it.

Perhaps.  But there there are more people I need to convince :-)

> 
> > On the other hand, if you can point out to me what I'm missing, and how I can
> > solve my problem with any virtual GPIOs, I'm all ears.
> > 
> > To make my problem simple and explicit:  I have a device attached to a UART
> > which has a separate regulator.  The regulator should be powered on if and
> 
> So you're using DTR to power the GPIO and hoping that the regulator
> stabilizes quickly enough so that by the time your open() finishes you
> don't have to add nonsensical msleep() calls before writing to the
> device. Sounds a bit fragile to me.

The gpio_set call is synchronous, and the gpio-regulator driver could add a
delay (I think).


> 
> > only if the /dev/ttyXX interface to the UART is open.  The device is a
> > bluetooth transceiver.
> 
> considering this is a BTUART device, why didn't you do this at the ldisc
> level ? hci_uart_open() sounds like a good choice from a quick thinking.
> 

I'll have a look into that, thanks.

NeilBrown

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux