Provided that the SER_RS485_RX_DURING_TX flag is not set, empty the
RX FIFO to prevent reading back the transmitted data.
Signed-off-by: Dimitris Lampridis <dlampridis@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/omap-serial.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 65abea2..dd8b1a5 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -342,6 +342,12 @@ static void serial_omap_stop_tx(struct uart_port *port)
if ((up->rs485.flags & SER_RS485_ENABLED) &&
!(up->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ /*
+ * Empty the RX FIFO, we are not interested in anything
+ * received during the half-duplex transmission.
+ */
+ serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR);
+ /* Re-enable RX interrupts */
up->ier |= UART_IER_RLSI | UART_IER_RDI;
up->port.read_status_mask |= UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
