On 03/10/2014 10:40 PM, Soren Brinkmann wrote:
> The Zynq UART is Cadence IP and the driver has been renamed accordingly.
> Migrate the DT to use the new binding for the UART driver.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Acked-by: Peter Crosthwaite <peter.crosthwaite@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> This change depends on 'tty: xuartps: Rebrand driver as Cadence UART',
> which introduces the new clock-names.
> ---
> arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 8b67b19392ec..0ed0d4b0579a 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -67,19 +67,19 @@
> };
>
> uart0: uart@e0000000 {
> - compatible = "xlnx,xuartps";
> + compatible = "xlnx,xuartps", "cdns,uart-r1p8";
> status = "disabled";
> clocks = <&clkc 23>, <&clkc 40>;
> - clock-names = "ref_clk", "aper_clk";
> + clock-names = "uart_clk", "pclk";
> reg = <0xE0000000 0x1000>;
> interrupts = <0 27 4>;
> };
>
> uart1: uart@e0001000 {
> - compatible = "xlnx,xuartps";
> + compatible = "xlnx,xuartps", "cdns,uart-r1p8";
> status = "disabled";
> clocks = <&clkc 24>, <&clkc 41>;
> - clock-names = "ref_clk", "aper_clk";
> + clock-names = "uart_clk", "pclk";
> reg = <0xE0001000 0x1000>;
> interrupts = <0 50 4>;
> };
This should be at least the part of 5/7 because between 5/7 and 7/7
driver will fail to probe.
Thanks,
Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
