Rename the config symbols for the Cadence UART to reflect the driver
rebranding:
SERIAL_XILINX_PS_UART(_CONSOLE) -> SERIAL_CADENCE_UART(_CONSOLE)
Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
---
drivers/tty/serial/Kconfig | 6 +++---
drivers/tty/serial/Makefile | 2 +-
drivers/tty/serial/xilinx_uartps.c | 8 ++++----
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1294284342bc..8c340dbf9e53 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1367,7 +1367,7 @@ config SERIAL_MXS_AUART_CONSOLE
help
Enable a MXS AUART port to be the system console.
-config SERIAL_XILINX_PS_UART
+config SERIAL_CADENCE_UART
tristate "Cadence (Xilinx Zynq) UART support"
depends on OF
select SERIAL_CORE
@@ -1375,9 +1375,9 @@ config SERIAL_XILINX_PS_UART
This driver supports the Cadence UART. It is found e.g. in Xilinx
Zynq.
-config SERIAL_XILINX_PS_UART_CONSOLE
+config SERIAL_CADENCE_UART_CONSOLE
bool "Cadence UART console support"
- depends on SERIAL_XILINX_PS_UART=y
+ depends on SERIAL_CADENCE_UART=y
select SERIAL_CORE_CONSOLE
help
Enable a Cadence UART port to be the system console.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854fef41..4b57523a34c7 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -79,7 +79,7 @@ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
-obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
+obj-$(CONFIG_SERIAL_CADENCE_UART) += xilinx_uartps.o
obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 0b27efef1cb6..7bfd19a7273d 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -13,7 +13,7 @@
* still shows in the file name, function/symbol name prefixes.
*/
-#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#if defined(CONFIG_SERIAL_CADENCE_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
@@ -1030,7 +1030,7 @@ static struct uart_port *cdns_uart_get_port(void)
return port;
}
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+#ifdef CONFIG_SERIAL_CADENCE_UART_CONSOLE
/**
* cdns_uart_console_wait_tx - Wait for the TX to be full
* @port: Handle to the uart port structure
@@ -1150,7 +1150,7 @@ static int __init cdns_uart_console_init(void)
console_initcall(cdns_uart_console_init);
-#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
+#endif /* CONFIG_SERIAL_CADENCE_UART_CONSOLE */
static struct uart_driver cdns_uart_uart_driver = {
.owner = THIS_MODULE,
@@ -1159,7 +1159,7 @@ static struct uart_driver cdns_uart_uart_driver = {
.major = CDNS_UART_MAJOR,
.minor = CDNS_UART_MINOR,
.nr = CDNS_UART_NR_PORTS,
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+#ifdef CONFIG_SERIAL_CADENCE_UART_CONSOLE
.cons = &cdns_uart_console,
#endif
};
--
1.9.0.1.g4196000
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
