this series introduces support for the common clock framework (CCF,
COMMON_CLK Kconfig option) in the PowerPC based MPC512x platform,
which brings device tree based clock lookup as well
at subsystem maintainers:
this series was streamlined for conflict free application through the
subsystems' individual trees, and consists of the following phases
- PCI peripheral driver cleanup (1/17) (may get dropped if the
Layerscape series gets preferred)
- introduction of CCF support including migration workarounds and
backwards compatibility, device tree updates (2/17 - 7/17) --
nevertheless I suggest to take the .dts/.dtsi updates through the
PowerPC tree, the extensions are straight forward and strictly are
clock related, and complement the CCF platform support
- peripheral driver adjustment to the CCF approach (8/17 - 16/17)
- removal of migration workarounds (17/17)
at device tree maintainers:
- the series does not introduce new bindings, it implements the existing
clock binding (OF clock provider, DT based clock lookup) and so
adjusts and extends DTS files
- the code is backwards compatible, and keeps working with device trees
which don't contain clock related information
the series is based on v3.13-rc1
the series passes 'checkpatch.pl --strict' except for one warning which
cannot get resolved, since the <linux/clk-provider.h> API dictates the
data type, "fixing" the checkpatch warning would break compilation
WARNING: static const char * array should probably be static const char * const
#421: FILE: arch/powerpc/platforms/512x/clock-commonclk.c:343:
+static const char *parent_names_mux0[] = {
total: 0 errors, 1 warnings, 0 checks, 835 lines checked
the series has been build tested (each step on PowerPC 512x, 52xx, 5xxx
multi platform, 83xx, 85xx, 86xx, and on ARM v6/v7), run tested (each
step on 512x, the switch to CCF on 52xx), and tested for backwards
compatibility (each step on 512x with a v3.11 dtb file)
changes in v6 (2013-11-30)
- catch up with changes between v3.12 and v3.13-rc1 (conflict
resolution, explicit include for <linux/of_address.h> in 4/17)
- remove the no longer referenced <asm/clk_interface.h> file from
arch/powerpc/include/ in the s/PPC_CLOCK/COMMON_CLK/ switch (7/17)
changes in v5 (2013-11-18)
- extend comments in the PCI driver cleanup (probe() vs setup_arch()
discussion, no code change); all other peripheral driver cleanup from
v4 was taken into mainline
- concentrate migration support in a separate routine for improved
maintainability
- fix the oscillator frequency lookup ('osc' reference) in the CCF
platform support code which creates the clock tree
- add backwards compatibility with device trees that lack clock specs,
concentrate compat support in a separate routine for improved
maintainability, add it in a separate patch for easier review
- consistent use of the 'ipg' name in DTS files for the register access
clock item of peripherals
- switch from PPC_CLOCK to COMMON_CLK at the same time for 512x and 52xx
(keep multi-platform setups operational), in a separate patch
- move removal of migration support to the very end of the series, it's
no longer intertwined with peripheral driver adjustment
- SPI and UART: get 'mclk' and 'ipg' clock items in a more consistent
order (less obfuscation in the diff)
- add/adjust Cc: and Acked-By: entries, rework commit messages and
comments where appropriate
changes in v4 (2013-08-06)
- remove explicit devm_clk_put() calls as these will occur implicitly
upon device release (01/31, 02/31, 03/31, 04/31, 05/31, 06/31, 08/31,
09/31, 27/31)
- split the PSC (SPI, UART) and MSCAN (CAN) related MCLK subtrees into
separate 'ipg'/'bdlc' gated clock items for register access as well as
the 'mclk' clock subtrees that apply to bitrates -- this eliminates
the need for "shared gates" and further reduces clock pre-enable
workarounds (11/31, 15/31, 17/31, 18/31, 20/31, 21/31, 22/31, 27/31)
- further adjust the CAN clock driver, fix an incomplete error code path
in the network device open callback (11/31), only enable the bitrate
clock when the network device is open (27/31)
- remove debug output in the clock tree setup when introducing the
platform's clock driver, there already is CONFIG_COMMON_CLK_DEBUG to
retrieve more complete information (17/31)
- remove an "enums don't work here" comment in the dt-bindings header
file (15/31)
- reword and update commit messages (body and/or subject) where
appropriate (03/31, 04/31, 05/31, 06/31, 08/31, 09/31, 11/31, 12/31,
17/31, 20/31, 21/31, 22/31, 27/31, 28/31, 30/31, 31/31)
- add 'Reviewed-By' attributes which were received for v3
changes in v3 (2013-07-22)
- rebase the series against v3.11-rc2
- re-ordered the series to first address all general clock handling
concerns in existing drivers, before introducing common clock support
in the platform's clock driver
- slightly rework the SPI (01/31), UART (02/31), and PSC FIFO (23/31)
clock handling in comparison to v2 which introduced those fixes
(devm_{get,put}_clk() calls, fewer goto labels in error paths)
- fix and improve clock handling (balance allocation and release of
clocks, check for errors during setup) in all of the other drivers
which this series has touched before in naive ways: USB (03/31), NAND
flash (04/31), video capture (05/31), I2C (06/31), ethernet (08/31),
PCI (09/31), CAN (11/31)
- silence a build warning in the ethernet driver (07/31)
- eliminate all PPC_CLOCK references, use 'per' clock names for NAND
flash (25/31) and VIU (26/31) as well
- unbreak CAN operation for the period between introducing common clock
support in the platform's clock driver and introducing common clock
support in the CAN peripheral driver as well as providing clock specs
in the device tree (provide clkdev aliases for SYS and REF)
- improve common clock support for CAN (devm_{get,put}_clk() calls,
check enable() errors, keep a reference to used clocks, disable and
put clocks after use)
- reworded several commit messages to better reflect the kind of change
and because fixes were applied before adding common infrastructure
support
- point to individual numbered patches of the series in the list of
changes for v2 as well
changes in v2 (2013-07-18)
- cleanup of the UART (02/24) and SPI (01/24) clock handling before the
introduction of common clock support for the platform, as incomplete
clock handling becomes fatal or more dangerous later (which in turn
changes the context of the "device tree lookup only" followup patch
later)
- reordered the sequence of patches to keep the serial communication
related parts together (UART, SPI, and PSC FIFO changes after common
clock support was introduced, which have become 11-14/24 now)
- updated commit messages for the clock API use cleanup in the serial
communication drivers, updated comments and reworded commit messages
in the core clock driver to expand on the pre-enable workaround and
clkdev registration (09/24)
- keep a reference to the PSC FIFO clock during use instead of looking
up the clock again in the uninit() routine (14/24)
- remove the clkdev.h header file inclusion directive with the removal
of the clkdev registration call (13/24)
initial v1 (2013-07-15)
Gerhard Sittig (17):
powerpc/fsl-pci: improve clock API use
dts: mpc512x: introduce dt-bindings/clock/ header
dts: mpc512x: add clock related device tree specs
clk: mpc512x: introduce COMMON_CLK for MPC512x (disabled)
clk: mpc512x: add backwards compat to the CCF code
dts: mpc512x: add clock specs for client lookups
clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK
spi: mpc512x: adjust to OF based clock lookup
serial: mpc512x: adjust for OF based clock lookup
serial: mpc512x: setup the PSC FIFO clock as well
USB: fsl-mph-dr-of: adjust for OF based clock lookup
mtd: mpc5121_nfc: adjust for OF based clock lookup
[media] fsl-viu: adjust for OF based clock lookup
net: can: mscan: adjust to common clock support for mpc512x
net: can: mscan: remove non-CCF code for MPC512x
powerpc/mpc512x: improve DIU related clock setup
clk: mpc512x: remove migration support workarounds
arch/powerpc/Kconfig | 5 -
arch/powerpc/boot/dts/ac14xx.dts | 7 +
arch/powerpc/boot/dts/mpc5121.dtsi | 113 ++-
arch/powerpc/include/asm/clk_interface.h | 20 -
arch/powerpc/kernel/Makefile | 1 -
arch/powerpc/kernel/clock.c | 82 ---
arch/powerpc/platforms/512x/Kconfig | 2 +-
arch/powerpc/platforms/512x/Makefile | 3 +-
arch/powerpc/platforms/512x/clock-commonclk.c | 951 +++++++++++++++++++++++++
arch/powerpc/platforms/512x/clock.c | 754 --------------------
arch/powerpc/platforms/512x/mpc512x_shared.c | 169 +++--
arch/powerpc/platforms/52xx/Kconfig | 2 +-
arch/powerpc/sysdev/fsl_pci.c | 52 ++
drivers/media/platform/fsl-viu.c | 2 +-
drivers/mtd/nand/mpc5121_nfc.c | 2 +-
drivers/net/can/mscan/mpc5xxx_can.c | 270 ++++---
drivers/spi/spi-mpc512x-psc.c | 26 +-
drivers/tty/serial/mpc52xx_uart.c | 90 ++-
drivers/usb/host/fsl-mph-dr-of.c | 13 +-
include/dt-bindings/clock/mpc512x-clock.h | 69 ++
include/linux/clk-provider.h | 16 +
21 files changed, 1557 insertions(+), 1092 deletions(-)
delete mode 100644 arch/powerpc/include/asm/clk_interface.h
delete mode 100644 arch/powerpc/kernel/clock.c
create mode 100644 arch/powerpc/platforms/512x/clock-commonclk.c
delete mode 100644 arch/powerpc/platforms/512x/clock.c
create mode 100644 include/dt-bindings/clock/mpc512x-clock.h
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
