On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote: > Hello, > > This is the third version of the patch set adds device tree bindings for the > sh sci serial port devices and adds OF parsing to the sh-sci driver. > > The bindings are based on Bastian Hecht's proposal (see > http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach taken > here is more minimalistic: instead of describing all hardware characteristics > that vary between the SCI device revisions in DT (such as registers layout), > that information is stored in the driver and selected based on the compatible > property value. Only SCI revisions used on ARM devices are supported through > DT, as DT support for SuperH is nowhere down the line. > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to 27/29 > replace memory and interrupt resources passed through platform data with > platform resources. Beside replacing a custom mechanism with a standard one, > it will also make the DT parsing code simpler as resource allocation will be > shared between DT and non-DT code paths. Finally, patches 28/29 to 29/29 add > OF parsing to the sh-sci driver and create DT bindings documentation. > > The patches have been test on a Lager board (r8a7790-based) and a Koelsch board > (r8a7791-based). Support for other SoCs will be added as needed. Note that all > current Renesas ARM SoCs seem to be compatible with the generic (H)SCI(F)(AB) > devices, but the plan is for their DT bindings to list the SoC-specific version > in case incompatibilities are found later. > > The series will need to be split in three parts to go to mainline. Patches > 01/29 to 07/29 should go through Greg's tree, patches 08/29 to 26/29 through > Simon's tree, and patches 27/29 to 29/29 through Greg's tree again. Greg, when > applying the first seven patches, could you please provide a stable branch for > Simon to base his branch on (I can send you a pull request rebased on top of > v3.13-rc1 if that can help) ? Simon will in turn provide a stable branch to > base the last three patches on. Perhaps you meant to CC Greg? > > Changes compared to v2: > > - Fix indentation in 12/29 > - Remove interrupt-parent property from the DT bindings documentation > - Remove -generic suffix from DT compatible values > - Reword the DT bindings documentation based on comments received on v2 > - Added r8a7791 support to the DT bindings > > Changes compared to v1: > > - Patches 04/29 to 27/29 have been added > - Multi-interrupt support has been removed from the DT bindings as they don't > support any SoC requiring multi-interrupt yet > > Cc: devicetree@xxxxxxxxxxxxxxx > > Bastian Hecht (1): > serial: sh-sci: Add OF support > > Laurent Pinchart (28): > serial: sh-sci: Sort headers alphabetically > serial: sh-sci: Remove baud rate calculation algorithm 5 > serial: sh-sci: Simplify baud rate calculation algorithms > serial: sh-sci: Remove duplicate interrupt check in verify port op > serial: sh-sci: Set the UPF_FIXED_PORT flag > serial: sh-sci: Don't check IRQ in verify port operation > serial: sh-sci: Support resources passed through platform resources > ARM: shmobile: sh7372: Use macros to declare SCIF devices > ARM: shmobile: sh73a0: Use macros to declare SCIF devices > ARM: shmobile: r8a7740: Use macros to declare SCIF devices > ARM: shmobile: r8a7779: Use macros to declare SCIF devices > ARM: shmobile: r7s72100: Don't define SCIF platform data in an array > ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array > ARM: shmobile: r8a7778: Don't define SCIF platform data in an array > ARM: shmobile: r8a7790: Don't define SCIF platform data in an array > ARM: shmobile: r8a7791: Don't define SCIF platform data in an array > ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources > ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources > ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as > resources > ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as > resources > ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as > resources > ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as > resources > ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as > resources > ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as > resources > ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as > resources > sh: Declare SCIF register base and IRQ as resources > serial: sh-sci: Remove platform data mapbase and irqs fields > serial: sh-sci: Add device tree bindings documentation > > .../bindings/serial/renesas,sci-serial.txt | 46 ++++ > arch/arm/mach-shmobile/setup-r7s72100.c | 63 +++--- > arch/arm/mach-shmobile/setup-r8a73a4.c | 65 +++--- > arch/arm/mach-shmobile/setup-r8a7740.c | 196 +++-------------- > arch/arm/mach-shmobile/setup-r8a7778.c | 45 ++-- > arch/arm/mach-shmobile/setup-r8a7779.c | 129 +++-------- > arch/arm/mach-shmobile/setup-r8a7790.c | 117 +++++----- > arch/arm/mach-shmobile/setup-r8a7791.c | 130 +++++------ > arch/arm/mach-shmobile/setup-sh7372.c | 161 +++----------- > arch/arm/mach-shmobile/setup-sh73a0.c | 192 +++-------------- > arch/sh/kernel/cpu/sh2/setup-sh7619.c | 27 ++- > arch/sh/kernel/cpu/sh2a/setup-mxg.c | 9 +- > arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 72 +++++-- > arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 36 +++- > arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 36 +++- > arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 96 +++++++-- > arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 96 +++++++-- > arch/sh/kernel/cpu/sh3/setup-sh7705.c | 18 +- > arch/sh/kernel/cpu/sh3/setup-sh770x.c | 27 ++- > arch/sh/kernel/cpu/sh3/setup-sh7710.c | 18 +- > arch/sh/kernel/cpu/sh3/setup-sh7720.c | 18 +- > arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 15 +- > arch/sh/kernel/cpu/sh4/setup-sh7750.c | 18 +- > arch/sh/kernel/cpu/sh4/setup-sh7760.c | 58 +++-- > arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 36 +++- > arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 9 +- > arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 27 ++- > arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 54 +++-- > arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 54 +++-- > arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 66 ++++-- > arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 27 ++- > arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 27 ++- > arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 90 ++++++-- > arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 18 +- > arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 54 +++-- > arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 82 +++++-- > arch/sh/kernel/cpu/sh4a/setup-shx3.c | 45 ++-- > arch/sh/kernel/cpu/sh5/setup-sh5.c | 11 +- > drivers/tty/serial/sh-sci.c | 238 ++++++++++++++++----- > include/linux/serial_sci.h | 35 +-- > 40 files changed, 1447 insertions(+), 1114 deletions(-) > create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt > > -- > Regards, > > Laurent Pinchart > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
