Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8778b57..81a4366 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -207,16 +207,21 @@ static struct platform_device irqpin3_device = {
#define R8A7740_SCIF(scif_type, index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
.type = scif_type, \
- .mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF, \
- .irqs = SCIx_IRQ_MUXED(irq), \
.scbrr_algo_id = SCBRR_ALGO_4, \
.scscr = SCSCR_RE | SCSCR_TE, \
}; \
\
+static struct resource scif##index##_resources[] = { \
+ DEFINE_RES_MEM(baseaddr, 0x100), \
+ DEFINE_RES_IRQ(irq), \
+}; \
+ \
static struct platform_device scif##index##_device = { \
.name = "sh-sci", \
.id = index, \
+ .resource = scif##index##_resources, \
+ .num_resources = ARRAY_SIZE(scif##index##_resources), \
.dev = { \
.platform_data = &scif##index##_platform_data, \
}, \
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
